TG2411C(e).book Page 1 Wednesday, January 26, 2005 4:10 PM Operating Instructions 2.4 GHz Digital Cordless Phone KX-TG2411C Model No. Charge the battery for 6 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference.
TG2411C(e).book Page 2 Wednesday, January 26, 2005 4:10 PM Table of Contents Introduction Technical information ....24 Base unit ..... 24 Accessory information .
TG2411C(e).book Page 3 Wednesday, January 26, 2005 4:10 PM Introduction Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Attach your purchase receipt here.
TG2411C(e).book Page 4 Wednesday, January 26, 2005 4:10 PM Introduction Incorrect reassembly can cause Important safety electric shock when the unit is subsequently used. instructions 12. Unplug this unit from power outlets and refer servicing to an authorized service When using this unit, basic safety center when the following conditions precautions should always be followed to occur:...
Page 5
TG2411C(e).book Page 5 Wednesday, January 26, 2005 4:10 PM Introduction L Do not touch the plug with wet hands. the unit in health care facilities if any regulations posted in the area instruct L The AC adaptor is used as the main you not to do so.
TG2411C(e).book Page 6 Wednesday, January 26, 2005 4:10 PM Introduction L The maximum calling distance may be For best performance shortened when the unit is used in the following places: Near obstacles such as hills, tunnels, undergrounds, near metal Base unit location/noise objects such as wire fences, etc.
AC adaptor Hooks Note: L Use only the included Panasonic AC adaptor PQLV19. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
TG2411C(e).book Page 8 Wednesday, January 26, 2005 4:10 PM Preparation If you subscribe to an xDSL service Battery installation L Please attach a noise filter (contact your xDSL provider) to the telephone line Insert the battery (1), and press it between the base unit and the telephone down until it snaps into the line jack when noise is heard during...
TG2411C(e).book Page 9 Wednesday, January 26, 2005 4:10 PM Preparation Battery performance Battery charge After your Panasonic battery is fully charged, you can expect the following Place the handset on the base unit for 6 performance: hours before initial use.
RECHARGE indicator flashes after a few telephone calls. L Use only the rechargeable Panasonic battery noted on page 3. Press the notch on the cover firmly and slide it as indicated by the arrow.
Page 11
TG2411C(e).book Page 11 Wednesday, January 26, 2005 4:10 PM Preparation Handset Using the navigator key {^} and {V} adjust the ringer volume and receiver/speaker volume. {<} and {>} select the ringer tone. Backlit handset keypad The dialing buttons will light for a few seconds after pressing any of the handset’s controls or lifting the handset off the base unit.
TG2411C(e).book Page 12 Wednesday, January 26, 2005 4:10 PM Making/Answering Calls L If the other party has difficulty hearing Making calls you, press {V} to decrease the speaker volume. L While on a call, you can switch from the receiver to the speakerphone by indicator pressing {s}.
TG2411C(e).book Page 13 Wednesday, January 26, 2005 4:10 PM Making/Answering Calls Answering calls Useful features during a call When a call is being received, the ringer indicator on the handset and the IN USE indicator on the base unit flash rapidly. HOLD button This feature allows you to put an outside If the handset is off the base unit, press...
TG2411C(e).book Page 14 Wednesday, January 26, 2005 4:10 PM Making/Answering Calls Note: Note: L Once you turn voice enhancer on, it will L The dialing mode will return to pulse be activated for all outside calls until when you hang up. turned off.
TG2411C(e).book Page 15 Wednesday, January 26, 2005 4:10 PM Making/Answering Calls Handset locator You can locate a misplaced handset by paging it from the base unit. IN USE indicator {HANDSET LOCATOR} Base unit: Press {HANDSET LOCATOR} to page the handset. L The IN USE indicator will flash rapidly.
TG2411C(e).book Page 16 Wednesday, January 26, 2005 4:10 PM Speed Dialer Note: Speed dialer L To exit programming, press {OFF} at any time. The handset speed dialer allows you to L If a phone number is stored in a dial key make calls without having to dial manually.
TG2411C(e).book Page 17 Wednesday, January 26, 2005 4:10 PM Programmable Settings Handset ringer tone Ringer settings You can change the ringer tone heard when an outside call is received. There are Important: 3 tones and 4 melodies. The default L Before setting, make sure the TALK setting is TONE 1.
TG2411C(e).book Page 18 Wednesday, January 26, 2005 4:10 PM Programmable Settings Base unit: Telephone settings Press and hold {HANDSET LOCATOR} until the CHARGE indicator flashes. Important: L After the CHARGE indicator starts L Before setting, make sure the TALK flashing, the rest of the procedure indicator is off.
TG2411C(e).book Page 19 Wednesday, January 26, 2005 4:10 PM Useful Information Wall mounting The base unit can be mounted on a wall phone plate. Connect the AC adaptor and the telephone line cord. Fasten the AC adaptor cord. Hooks To power outlet Connect the telephone line cord.
TG2411C(e).book Page 20 Wednesday, January 26, 2005 4:10 PM Useful Information Troubleshooting General use Problem Cause & solution The unit does not work. L Make sure that the battery is installed correctly (page L Check the connections (page 7). L Fully charge the battery (page 9). L Clean the charge contacts and charge again (page 9).
TG2411C(e).book Page 21 Wednesday, January 26, 2005 4:10 PM Useful Information Making/answering calls, paging Problem Cause & solution Static is heard, sound L Move the handset and the base unit away from other cuts in and out. electrical appliances. Interference from other L Move closer to the base unit.
TG2411C(e).book Page 22 Wednesday, January 26, 2005 4:10 PM Useful Information Battery recharge Problem Cause & solution The RECHARGE L Fully charge the battery (page 9). indicator flashes or the handset beeps intermittently. I charged the battery fully, L Clean the charge contacts and charge again (page 9). but the RECHARGE L The battery may need to be replaced (page 10).
TG2411C(e).book Page 23 Wednesday, January 26, 2005 4:10 PM Useful Information Important information NOTICE: Caution: This equipment meets the applicable Users should not attempt to make such Industry Canada Terminal Equipment connections themselves, but should Technical Specifications. This is contact the appropriate electric confirmed by the registration number.
Page 24
TG2411C(e).book Page 24 Wednesday, January 26, 2005 4:10 PM Useful Information L The illustrations in these instructions Technical information may vary slightly from the actual product. Base unit Operating environment: 5 °C – 40 °C (41 °F – 104 °F) Frequency: 2.4 GHz –...
Page 25
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
Page 26
TG2411C(e).book Page 26 Wednesday, January 26, 2005 4:10 PM Index Troubleshooting Index Battery charge: 22 General use: 20 A Accessories: 3 Making/answering calls, paging: 21 Answering calls: 13 Power failure: 22 Programmable settings: 20 B Backlit handset keypad: 11 Base unit location: 6 V VE (voice enhancer): 13 Battery Voice enhancer: 13...