Bi-Wire Connection; Connecting The Power Cable; Example Of A Bi-Wiring Connection (R Channel) - Yamaha A-S2100 Owner's Manual

• Bi-wire connection
The hi-wire connection separates the woofer from the
combined midrange and tweeter section. A hi-wire
compatible speaker has four binding post terminals. These
two sets of terminals allow the speaker to be split into two
independent sections. This split connects the mid and high
frequency drivers to one set of terminals and the low
frequency driver to the other pair.
Example of a bi-wiring connection (R channel)
Rear panel of A-S2100 Speaker
Caution
To use the hi-wire connections, ~e impedance of each speaker
must be 8
Q
or higher.
Remove the shorting bars or bridges to separate the LPF (low
pass filter) and HPF (high pass filter) crossovers.
,,,
~<i>:O
To use the hi-wire connections, switch the SPEAKERS selector
on the front panel to the A+B BI-WIRING position.
• Connecting the power cable
Plug the power cable into the AC IN inlet when all
connections are complete, and then plug in the power
cable to the AC outlet.
Rear panel of A-S21 00
ACIN
[OJ
Supplied power cable
to an AC outlet
19En
I