Air Circulation; Cold Accumulators; Storage Advice; Wine Arrangement - AEG S92700CNM0 User Manual

4.4 Ice-cube production
This appliance is equipped with two trays
for the production of ice-cubes.
1. Fill the trays with water.
2. Put the trays in the freezer
compartment
CAUTION!
Do not use metallic
instruments to remove the
tray from the freezer.

4.5 Cold accumulators

The freezer contains at least one cold
accumulator which increases storage
time in the event of a power cut or
breakdown.

4.6 Wine arrangement

The temperature can be adjusted
between + 6 and + 16°C.
This compartment is ideal for storing and
refining red or white wines for long
periods.
• Lay the bottles down in such a way
that the corks do not dry.
• Keep the wine in the dark. The door is
in anti-UV darkened double glass to
protect the wine from the light in case
the appliance is located in a well-lit
place.
• Avoid switching the appliance light on
too often or for too long. Wine keeps
better in the dark.
• Handle the bottles with care, to avoid
agitating the wine.
Follow the
recommendations and
advice received at the time
of purchase or given in the
technical documentation
regarding the quality,
duration and optimum
storage temperature of the
wine.

4.7 Air circulation

• Do not cover the shelves
with any protective
material, such as paper,
cardboard or plastic,
which may obstruct the
air circulation through
them.
• Do not place the bottles
at directly against the
back wall of the
compartment which will
obstruct the air
circulation through them.

4.8 Storage advice

The storage time for wine depends on
ageing, the type of grapes, alcoholic
content and level of fructose and tannin
contained in it. At the time of purchase,
check if the wine is already aged or if it
will improve over time.
4.9 Wine Cooler shelves
The shelves can be removed for
cleaning.
Adjust the shelves as follows:
• The long shelves must be placed on
the horizontal guides.
• Only the short shelf can be inserted in
the shelf support structure in an
inclined position. During this
operation, make sure that the rear
pins are properly inserted in the
guides.
• The shelf support structure must be
placed at the bottom of the
compartment.
ENGLISH 9