Installing and Connecting the Projection TV (continued)
Note:
• To view scrambled channels through the
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
Connecting a camcorder
Use this connection to view a picture directly
from your camcorder.
1
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
camcorder to AUDIO and S VIDEO IN
inside the drop-down panel on the front
of the projection TV (White-AUDIO Left,
Red-AUDIO Right**).
2
Press VIDEO 2 to select the video inputs
from a camcorder.
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
10
Disconnect all power sources before making any connections.
S video cable (not supplied)
AV cable
(not supplied)
VIDEO
S VIDEO
AUDIO-L
AUDIO-R
AUDIO
R
VIDEO
L
S VIDEO
(MONO)
VIDEO 2 INPUT
(Front of projection TV)
Audio/
video
outputs
S VIDEO
OUT
Camcorder