Panasonic KX-TDA100 Programming Manual page 299

Pulse Dial—Pulse Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing trunk calls, audible tones can be
heard as the dialled number is sent out, which informs the extension user that the number has been dialled.
Value Range
No, Yes
Maintenance Console Location
3.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse Maximum BREAK Width
Specifies the maximum length of the break signal in a pulse dial.
Value Range
8 ´ n (n=9–20) ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse Minimum MAKE Width
Specifies the minimum length of the make signal in a pulse dial.
Value Range
8 ´ n (n=1–5) ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - DID type
3.30 [1-1] Slot—Card Property - DID type
PC Programming Manual 299