Inlet Hose Connection - Sharp ES-D159T-SL Instruction Manual

INLET HOSE CONNECTION

For Ordinary Tap
1 Pull down the collar of the
inlet hose to separate it
from the water tap
adapter.
4 Remove the tape, and
screw connector B into
connector A tightly.
Connector A
Connector B
For Screw-Shaped Tap
1 Connect the inlet hose to
the water tap by screwing
the connector tightly.
Rubber
Packing
Connector
Hose Connector
2 Loosen the four screws
properly in fitting into
water tap.
5 Connect the inlet hose to
the water tap adapter by
pulling down the collar of
the hose end.
2 Connect the connector-
inlet supplied if
necessary.
Connector
inlet
Rubber
Packing
Connector
Hose Connector
6
3 Fit the water tap adapter
into the water tap and
tighten the four screws
evenly while pushing up
the adapter so that the
rubber packing can attach
to the water tap tightly.
TAPE
6 Connect the inlet hose
adapter of the hose to the
water inlet of the washing
machine by turning it
clockwise to be fixed
tightly.
• Please check the rubber
packing inside the inlet hose
adapter of the hose.
3 Insert the inlet hose
adapter into the water
inlet of a washing
machine and turn it to be
fixed. .
* Check the packing in the inlet