Table of Contents
Advertisement
Issue 21 - February 2000
Call Divert Cancel
E.g.
To Cancel divert for Ext. 15 to Ext. 20
Single Line Telephones (SLT)
Only MF Tone with Time Break ReCall SLT's can be used with these systems.
SLT's are not equipped with line Keys, so that the standard Keypad is used to select External lines
and perform other functions.
Up to 4 approved 2-wire telephones can be used in this system to provide the following functions-
•
Making and receiving Calls
•
Redial/System Speed Dials.
•
Call Hold and Transfer
•
Internal 3 party Conference
•
Page Calls and Meet-Me Answer
•
Doorphone Calls
•
Door Opener operation
•
Call Pick-Up
•
Facsimile or TAM machine capability
Exchange Line Access
This feature operates when you make an External Call with using manual dial on the SLT.
You are connected to an External line 5 seconds after you finish dialling.
However, if you dial ! or # as the last digit, you can make a Call immediately.
Automatic access to Exchange line
By dialling 9 you are connected with any available External line automatiCally.
NOTE: If LCR is set on the Lines then it will operate for all Calls made.
© Panasonic UK Ltd.
1. Press the ON/OFF Key.
•
Listen for Internal dial tone.
2. Dial 7 2 !
3. Dial the extension number on which the Call Divert is Set.
4. Dial the extension number to which the Call is diverted.
Dial
1. Lift the Handset.
•
You will hear internal dial Tone.
2. Press 9.
•
Listen for continuous Tone
•
You are connected to the first available Line automatiCally.
3. Dial telephone number required.
•
Press ! or # to speed operation see above.
•
If all Lines are being used, you will hear Busy Tone.
- 36 -
7 2 ! 1 5 2 0
A-Series (UK)
E & OE
Advertisement
Table of Contents
