Yamaha CLP- 585 Owner's Manual page 76

Connections
Automatic Setup by WPS
Please make sure to connect the USB wireless LAN adaptor (sold separately) to
the USB [TO DEVICE] terminal, otherwise the displays for setup will not be
shown.
If your access point supports WPS, you can easily connect the instrument to
access point by WPS, without making settings, such as password input, etc.
Press the WPS button on the USB wireless LAN adaptor, then press the WPS
button on your access point within two minutes.
When connection is done successfully, "Completed" is shown in the display,
and the Voice display will be shown.
Finally, connect the iPhone/iPad to the access point referring to the "iPhone/
iPad Connection Manual" on the website (page 9).
Manual Setup
Make sure to connect the USB wireless LAN adaptor (sold separately) to the
USB [TO DEVICE] terminal, otherwise the displays for setup will not be
shown.
1.
To call up the network list, perform steps 1 – 2 in the
"Displaying the Networks in the wireless LAN and
connecting to the Network" (page 75).
2.
Select "Other" at the bottom of the wireless list, then press
the [>] button.
3.
Set the SSID, Security and Password to the same as the
settings on the access point.
3-1.
Select the "SSID" then press the [>] button to call up the
display for SSID input, then enter the SSID.
For details on how to enter the characters, refer to "Renaming files" on
page 66. After entering the SSID, press the [MENU] button to finalize
the setting. Operation returns to the "Other" display.
76
CLP-585/575/545/535/565GP Owner's Manual
NOTE
WPS setup cannot be available
while the instrument is in the
specific mode as follows:
• When in the Demo mode, or
while a Song is playing back
or being paused temporarily,
or while the instrument is in
the Song Recording mode.
• When Wireless LAN mode is
set to "Accesspoint Mode" in
the System Menu.