Yamaha CP4 Stage Reference Manual page 21

03: Effect-A
04: Effect-B
Parameter name Description
These parameters can be used to select a category and a type for Insertion
Effects A and B.
(Effect Category)
Settings: Refer to the Data List (pdf) for a full list of the categories and types that can
(Effect Type)
NOTE
This parameter can be used to select one of the current effect type's
presets, which configure all parameters to suit a particular need. A full list of
(Effect Preset)
presets for each effect type can be found in the Data List (pdf).
Effect parameters The parameters available for editing will depend on the currently selected
effect type. A full list of parameters for each effect type can be found in the
Data List (pdf).
NOTE
05: Controller
On the Controller screen, you can assign a function to each controller for the current Part. When set
to "off", the controller will perform only its standard function.
Parameter name Description
This parameter can be used to assign control of a parameter from Insertion
Effect A or B to the pitch bend wheel.
(Controller Destination:
Pitch Bend Wheel)
Settings: off, EffA(+), EffA(-), EffB(+), and EffB(-)
off: None of the above functions is assigned.
EffA(+) or EffB(+): The more the finger slot in the middle of the wheel is pushed away
from you, the greater the effect on the assigned parameter and vice-versa.
EffA(-) or EffB(-): The more the finger slot in the middle of the wheel is pulled towards
you, the greater the effect on the assigned parameter and vice-versa.
This parameter can be used to assign control of a parameter from Insertion
Effect A or B to the modulation wheel.
(Controller Destination:
Modulation Wheel)
Settings: off, EffA(+), EffA(-), EffB(+), and EffB(-)
off: None of the above functions is assigned.
EffA(+) or EffB(+): The more the finger slot at the front of the wheel is pushed away
from you, the greater the effect on the assigned parameter and vice-versa.
EffA(-) or EffB(-): The more the finger slot at the front of the wheel is pulled towards
you, the greater the effect on the assigned parameter and vice-versa.
This parameter can be used to assign on/off control of Insertion Effect A or B
to an FC4 or FC5 Foot Switch (sold separately).
(Controller Destination:
Foot Switch)
Settings: off, EffA, and EffB
off: Neither of the above functions is assigned.
EffA: The foot switch will turn Insertion Effect A on and off.
EffB: The foot switch will turn Insertion Effect B on and off.
CP4 STAGE: These parameters can be used to assign control of a parameter from
Insertion Effect A or B or control of the current Voice's volume to an FC7 Foot
Controller (sold separately).
(Controller Destination:
Settings: off, EffA(+), EffA(-), EffB(+), EffB(-), and volume
Foot Controller 1)
off: None of the above functions is assigned.
EffA(+) or EffB(+): The more the controller is operated, the greater the effect on the
(Controller Destination:
assigned parameter.
Foot Controller 2)
EffA(-) or EffB(-): The more the controller is operated, the smaller the effect on the
assigned parameter.
CP40 STAGE:
volume: The foot controller can be used to adjust the current Voice's volume.
(Controller Destination:
Foot Controller)
21 CP4 STAGE/CP40 STAGE Reference Manual
be selected.
Each effect type is described in detail in the Synthesizer Parameter Manual
(pdf).
Each effect parameter is described in detail in the Synthesizer Parameter
Manual (pdf).
Design of the CP4 STAGE & CP40 STAGE
Reference
Performances
Editing Performances
Common Edit Area
01: Chorus Effect
02: Reverb Effect
03: General
04: Name
Part Edit Area
01: Play Mode
02: Filter/EG
03: Effect-A
04: Effect-B
05: Controller
06: Receive Switch
Master Keyboard Area
Job Area
01: Recall
02: Copy
03: Bulk
Store Performance Function
Compare Performance Function
File Area
01: Save
02: Load
03: Rename
04: Delete
05: Format
06: Memory Info
Utility Area
01: General
02: MIDI
03: Controller
04: MasterComp
05: Master EQ
06: Panel Lock
Utility Job Area
01: Factory Set
02: Version
Appendix