Setting Intelligent Function Detection Settings - Canon VB-M700F Operation Manual

Important
Notes on intelligent function settings and operation
• When setting intelligent function, do an actual detection test
to confirm that detection will be performed correctly.
• When the brightness of the entire screen suddenly changes,
the detection may be delayed for up to 5 minutes.
• If [Auto] is used in [Day/Night] settings, and automatic
switching between [Day Mode] and [Night Mode] is
performed, [Restarting intelligent function. Please wait.] is
shown and intelligent function will restart. Detection will not
be performed while intelligent function is restarting.
• Do not set detection areas in the On-screen Display area.
• Movements of subjects are not detected in privacy mask
areas.
• If the camera is operated during intelligent function setting or
operation, [Restarting intelligent function. Please wait.] is
shown and intelligent function will restart. Detection will not
be performed while intelligent function is restarting.
• Set intelligent function again if the angle of view is changed
through camera operation, or the camera position of a preset
or home position is changed using Preset Setting Tool.
• If [Status] in [Detection Setting List] is [Enabled] when the
camera position is fixed, control privileges cannot be
obtained by VB Viewer or RM. Also, the preset tour will no
longer run.
Difficult-to-detect Subjects
• Objects or portions where there is little contrast in color or
brightness with the background may not be detected.
• Small objects and changes on the screen may not be
detected.
• Partial or entire changes in light on the screen may trigger
detection.
• If multiple objects overlap, the detection status may change.
Setting Intelligent Function Detection
Settings
Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
[Detection Criteria] tab
Image Display Area
(1) [Detection Settings Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Settings Name], ASCII characters
(spaces or printable characters) can be used.
(2) [Area Shape]
Select [Rectangular] or [Polygonal] for the shape of
detection areas you want to set in the image display
area.
For details on detection area setting operations, see
"Setting Detection Criteria per Detection Type"
(p. 6-29).
[Clear]
If the [Area Shape] is [Polygonal], the detection area
set in the image display area is deleted.
(3) [Display Color]
Choose the color of the detection setting. The color
selected here becomes the display color of the
detection area in the image display area.
Intelligent Function Setting Tool
(1)
(2)
(3)
(4)
Detection Area
6
6
-27