Audio Output; Display - Silvercrest PNA-M4310T User Manual And Service Information

English

Audio Output

Select the Speaker option if you want to output the sound via
the built-in speaker. Select FM Transmitter to use the built-in
FM transmitter to send the sound to your car radio. The
signal quality depends on the car design and the model of
the car radio receiver. In some cars some noise can be
heard or the reception is interfered with or impossible.
To set the FM transmitter:
Tap the FM Transmitter button:
-
Tap the ► or ◄ button to select a frequency between 87.5
-
MHz and 108.0 MHz or tap any of the four preset stations if
you have already stored a station.
If required you can store the currently tuned frequency
i
by tapping the floppy disc icon and selecting one of the
four presets.
To exit the menu tap
-
108
.
Navigation Device PNA-M4310T

Display

In this menu you can set the display brightness in six levels,
enable a power-saving mode and calibrate the display.
Brightness
Tap the icon:
-
Tap ◄ or ► to set the desired brightness value.
-
Power-saving mode
Tap the icon:
-
Select one of the default timeouts for powering the
-
display off or select Off to disable the power-saving
function.