This turns the LCD monitor light on or off.
h Ventilation outlet
This is the outlet from the cooling fan.
Note
Be careful not to obstruct the ventilation opening.
i MENU button
Pressing this button displays the menu in the LCD
monitor (see page 22). Press once more to return to
the DSR-DU1 status display (see next item).
j POWER switch
This powers the DSR-DU1 on or off.
k WARNING indicator
This indicator lights or flashes when there is a
problem with the DSR-DU1 (see page 25).
l STOP button
During playback from the DSR-DU1 hard disk,
pressing this button stops the playback.
m
(previous) button
.
During playback, pressing this makes a reverse
×
search at
5 speed.
When stopped, pressing this button once moves to
the previous recording start point. Holding down
the button for at least two seconds moves back 10
clips*.
*In this system, the term "clip" is used to refer to
the unit of recording from the start point to the end
point.
n
(playback) button
B
This plays back from any position on the DSR-DU1
hard disk.
o
(next) button
>
During playback, pressing this makes a forward
×
search at
5 speed.
When stopped, pressing this button once moves to
the next recording start point. Holding down the
button for at least two seconds moves forward 10
clips*.
*In this system, the term "clip" is used to refer to
the unit of recording from the start point to the end
point.
p LCD monitor
This shows the DSR-DU1 status (see next item) or
a menu (see page 22).
q Jog dial
8
Names and Functions of Parts
This is used to operate the menu displayed on the
LCD monitor, and change TC/UB/clip settings.
Turn the dial to select an item, and press to confirm
(see page 23).
r Remote controller
Connect to the REMOTE connector on the main
unit. This has a START/STOP button, CUE button,
and tally indicator, and the button functions are the
same as those on the main unit. The tally indicator
lights red only during recording.
s i.LINK cable
This cable is supplied with the DSR-DU1, and has
a 4-pin connector at each end. Connect the L-
shaped end to the main unit.
LCD monitor display
When the LCD monitor is not displaying the menu, it
shows the DSR-DU1 status as follows.
D
P
L
A
Y
A
T
C
R
C
G
H
H
:
M
M
D
I
S
K
X
B
A
T
T
I
K
Display
Type
Indication
area
A
Command PLAY
P-PAUSE
REC
R-PAUSE
FWD
REV
STOP
>>
<<
PC-REMOTE
B
Recording
Blank
mode
INT
E
B
F
:
S
S
:
F
F
X
X
m
i
n
H
i L
J
Meaning
Playback
Playback paused
Recording
Recording paused
Search forward
Reverse search
Stopped
Moving to next
recording start
point
Moving to previous
recording start
point
Using SBP2
protocol
Normal
Interval recording