Fujitsu ETERNUS DX60 S2 User Manual page 8

4.
Fasten the controller enclosure or the drive enclosure in the rack.
● 2.5" Type Controller Enclosure
(1) Use the thumb screw to fasten the front right of the controller enclosure to the rack pillars.
Thumb screw
(2) Attach the flange cover to the front left of the controller enclosure and use the thumb screw to
fasten it to the rack pillars.
Do not touch the power switch (
IMPORTANT
Thumb screw
● 3.5" Type Controller Enclosure/3.5" Type Drive Enclosure
(1) Use the thumb screws at the front of the controller enclosure or the drive enclosure to fasten it to
the rack.
Thumb screw
(2) Attach the front cover.
Do not touch the power switch (
IMPORTANT
FUJITSU Storage ETERNUS DX60 S2 Disk storage system Read Me First
(Rear rack pillars)
) when attaching the flange cover.
(Rear rack pillars)
) when attaching the flange cover.
8
Copyright 2014 FUJITSU LIMITED
(Rear rack pillars)
P3AM-5542-07EN