Smtp Server Name; Use Tls; Administrator E-Mail Address; Pop Server Name - Sony Ipela SNC-VB635 User Manual

SMTP server name

Type the SMTP server name using up to 64 characters,
or the IP address of the SMTP server.
SMTP port number
Enter a port number from 1 to 65535.
The standard port number is 25.
The standard port number of SMTPs is 465, if the TLS
function is enabled.

Use TLS

When using the encryption function of the TLS, select
the checkbox.
Note
Models sold in China do not support the TLS function.
Authentication
Select whether authentication is required when you send
an e-mail.
None: No authentication is required when an e-mail is
sent.
SMTP: Select when SMTP authentication is required.
POP before SMTP: Select when POP before SMTP
authentication is required.
Combination of POP before SMTP and SMTP:
Select when both SMTP authentication and POP
before SMTP authentication is required.
POP mode
Select POP3 or APOP as the authentication method for
POP authentication.
Note
The model on sale in China does not support the APOP
authentication.
Wait time after POP
Set the waiting time in POP before SMTP before
SMTP authentication after POP authentication is
completed. Timeout can be set from 0 to 10,000 msec.

POP server name

This is necessary when POP before SMTP is selected
for Authentication.
Type the POP (receiving mail) server name using up to
64 characters, or type the IP address of the POP server.
This setting is necessary when the SMTP server that
sends e-mails performs authentication using the POP
user account.
POP port number
Enter a port number from 1 to 65535.
The standard port number is 110.
62
Setting the Action output — Action output Menu
Authentication mode
Select Login or CRAM-MD5 as the authentication
method for SMTP authentication.
Note
The model on sale in China does not support the CRAM-
MD5 authentication.
User name, Password
Type the user name and password of the user who owns
the mail account using up to 64 characters. This setting
is necessary when the SMTP server that sends e-mails
performs authentication.
Address
Recipient e-mail address 1, 2, 3
Type the recipient e-mail address using up to 64
characters.
You can specify up to three recipient e-mail addresses.

Administrator e-mail address

Type the Administrator e-mail address using up to 64
characters.
This address is used for reply e-mails and sending
system messages from the mail server.
Content
Subject
Type the subject/title of the e-mail. The length for
entering letters should be within 64 characters.
When an e-mail is sent in response to an alarm detection,
the following string that indicates the type of alarm that
will be added in the subject.
• When the Sensor 1 detects an alarm: (Sensor 1)
• When the Sensor 2 detects an alarm: (Sensor 2)
• When the Presence Sensor detects an alarm: (Presence
Sensor)
• When the Camera tampering detection detects an
alarm: (Tampering)
• When the Motion detection detects an alarm: (VMD)
• When VMF detects an alarm: (VMF)
• When the Network disconnection is detected
(Disconnected)
• When the Face detection detects an alarm: (Face
Detection)
(Event1 (Condition1)) is additionally available for event
condition detection.
Message
Type the text of the e-mail.
The length for entering letters should be within 384
characters.