Panasonic CF-17 Operating Instructions Manual page 11

6
Setup Windows 95
Select settings for your region, then press [Next].
1
NOTE
Moving the cursor ( ) or clicking buttons can be performed with the touch
pad, a key or the touchscreen. (
2 Select your keyboard layout, then press [Next].
(for U.S.A.: United States 101)
3 Enter your name and your company's name, then press [Next].
(It is possible to omit the company name item.)
The License Agreement will be displayed.
After reading the agreement, select [I accept the agreement] or [I don't accept
4
the agreement], then press [Next].
NOTE
If [I accept the agreement] is selected, the [Certificate of Authenticity] will appear.
If [I don't accept the agreement] is selected, the Windows setup will be aborted.
Input the Product Number written on the "Certificate of Authenticity" located
5
®
in the Windows 95 book that provided with this computer, then press [Next].
Press [Finish].
6
Input the correct date, time and time zone and press [Close].
7
You can also complete these settings at a later time.
Press [Next] to complete the printer setup or [Cancel] to skip.
8
NOTE
Follow the on-screen instructions. You can complete these settings at a later time.
9 When the following screen is displayed, add the check mark depending on
your needs.
If this box is checked, the time to enter the hibernation mode and the time to
resume from the hibernation mode are shortened.
NOTE
You can complete these settings at a later time. (
Then, when the alignment of the touchscreen is needed, perform [Calibrate] in
[Start] - [Programs] - [Updd]. (
This concludes the first-time use operation guidelines.
page 13, "Touchscreen")
If this box is checked, it is possible to shorten the
start-up time from the computer OFF state and
the following occurs.
The Windows Logo display (i.e., the cloud dis-
play) is not shown at start-up.
The channel bar of Internet Explorer 4.0 is not
shown.
No background paper is displayed.
"Welcome" of Internet Explorer 4.0
To display the start-up menu by pressing
at start-up, it is necessary to press
F8
slightly faster than normal.
F8
"Smart Boot" )
"Touchscreen" )
is not shown.
11