Epson EX7230 Pro Quick Setup page 3

4
Attach the wireless LAN module cover and secure it using the screw you
removed.
5
Press the Menu button on the remote control, select the Network menu,
and press .
6
Choose Network Configuration and press
7
Select the Wireless LAN menu and press
8
Choose Connection Mode, press
connection to a computer, tablet, or smartphone) or Advanced (for
a connection to a router or access point), then press
you're finished, press Esc to return to the Wireless LAN menu.
9
If you chose the Advanced connection mode, select SSID, press
enter your network name (SSID) on the screen that appears.
•
To select a number or character, use the arrow buttons on the remote
control to highlight it, then press
•
To switch between uppercase and lowercase letters, select CAPS and
press .
•
To change the displayed symbols, select SYM1 or SYM2 and
press .
When you're finished entering the SSID, select Finish and press
10
If you chose the Advanced connection mode, select IP settings and
press .
If your network assigns addresses automatically, turn on DHCP. If not,
turn off DHCP and enter the projector's IP Address, Subnet Mask, and
Gateway Address, as needed.
To enter numbers, use the arrow buttons on the remote control to
highlight a number, then press
an address, highlight Finish, then press
11
To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and IP Address Display
settings to Off.
.
.
, select Quick (for a direct
again. When
and
.
.
. When you're finished entering
. Press Esc.
12
When you're finished selecting settings in the Wireless LAN menu,
press Esc.
13
If you are connecting the projector to a secure network, select the
Security menu and press
you're finished.
14
Select Complete and press
save your settings.
15
See "Install network software" for additional instructions.
Install network software
To project over the network, download and install the EasyMP
Projection software on each computer that you will project from. To monitor
and control your projector over the network, download and install the EasyMP
Monitor software (Windows only). Click the icons on your desktop to access the
software download pages.
For instructions on installing and using your network software, click the icons
on your desktop to access the online EasyMP Network Projection Operation
Guide or EasyMP Monitor Operation Guide (requires an Internet connection). If
you don't see the software download or guide icons on your desktop, you can
install them from the projector CD or go to the Epson website, as described in
"Where to get help."
Project wirelessly from a
mobile device
You can connect your mobile device and projector using Epson iProjection™
and a QR code. Make sure the wireless LAN module is installed in your projector
(optional with the EX7230 Pro) and the latest version of Epson iProjection is
installed on your device.
Install the Epson iProjection app
To project from an iOS or Android device,
download and install the Epson iProjection app.
Visit epson.com/projectorapp (U.S.) or
epson.ca/projectorapp (Canada) for more information.
Direct wireless connection
Make sure your device and Epson projector are not connected to a network and
your Epson projector's Connection Mode is set to Quick.
1
iProjection on your device's Home screen.
Tap
2
Tap Projector to open the Search Projector menu.
3
Tap Read QR code.
4
Point your device's camera at the QR code your projector displays; the QR
code is read automatically.
5
Tap OK to register your projector's Wi-Fi profile.
6
Tap Install to install your projector's Wi-Fi profile.
7
Tap Install Now at the Unsigned Profile notification.
8
Tap Done to exit the Profile Installed screen.
9
Tap OK to confirm the connection to the projector.
10
Note the projector network name (SSID) shown on your device's screen.
Then go to the Wi-Fi settings on your device to select that network.
Your device and Epson projector are now connected.
. Then select settings and press Esc when
, then select Yes and press
® Network
again to