Whirlpool Cabrio Use & Care Manual page 11

11.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off, if
desired.
NOTE: Not all options are available with all cycles. Touch
control panel to select any other options.
12.
Touch START/PAUSE to begin
wash cycle
Touch the START/PAUSE button to start the wash cycle.
When the cycle has nished, the end of cycle signal will
sound (if set). Promptly remove items when cycle is done
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid
and press START/PAUSE again to restart the cycle.
If lid is left open for more than 10 minutes the water
will pump out.
11