EPSON Perfection 1240U
4.2.4 Inverter Lamp / Inverter Board Removal
1. Release the Carriage Lock. (See Section 4.2.1.)
2. Remove the Document Cover. (See Section 4.2.2.)
3. Remove the Upper Housing. (See Section 4.2.3.)
4. Remove the two screws (CCP, M3x8) on the Carriage Unit. (See
Figure 4-8.)
5. Using a standard screw driver, lift up the carriage cover in the
Carriage Unit, and then move it to the back to remove it. (See Figure
4-9.)
Assembly and Disassembly
Figure 4-8. Carriage Unit Disassembly (1)
Figure 4-9. Carriage Unit Disassembly (2)
Disassembly Procedures
Revision A
CCP Screws (M3x8)
30