Precaution On Replacing The Vc-489 Board; Using Service Jig - Sony DCR-SR32E Service Manual

1-3. PRECAUTION ON REPLACING THE VC-489 BOARD

DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Refer to Service Manual ADJ, and perform "DESTINATION DATA WRITE".
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Refer to Service Manual ADJ, and perform "USB SERIAL No. INPUT".

1-4. USING SERVICE JIG

Connect the extension cable between CN4008 on the DA-039 board and CN1005 on the VC-489 board.
DA-039 board (side B)
CN4008
CN1005
VC-489 board (side B)
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_L2
Extension cable (100P)
1-3
ENGLISH JAPANESE
ENGLISH JAPANESE