Language Settings - Sanyo HVR-DX610 Instruction Manual

VCR Record Quality
You can set the default VCR recording quality to SP (Standard Play) or LP
(Long Play). SP is higher quality, but LP provides 2 times the recording
time; e.g., a 2 hour tape will record for 4 hours in LP mode.
Follow the same procedure as the 'DVD Record Quality'.
Auto Chapter
During recording, chapter markers are added automatically at fixed
intervals. You can set this interval to 5 minutes, 10 minutes or 15
minutes. To turn off automatic chapter marking, select 'Off'.
Follow the same procedure as the 'DVD Record Quality'.

LANGUAGE Settings

OSD Language
Select a language for the DVD Recorder+VCR Setup menu and on-
screen displays.
1
Press [SETUP]. The Setup menu appears.
2
Use [œ] and [√] to select 'Language'.
3
While 'Language' is selected, press [†] to select 'OSD Language'.
4
Press [ENTER] to move to the second level.
5
Use [.../†] to select the desired language.
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit
the menu.
Initial Setup
Recording Options
DVD Record Quality SP
VCR Record Quality SP
Select VCR
Auto Chapter 5min
Quality
LP
Instructions SP
Enter-Confirm Setup-Exit
Move ...†
Recording Options
DVD Record Quality SP
Select Auto
VCR Record Quality SP
Chapter
Auto Chapter 5min
Off
5min
Instructions
10min
Enter-Confirm Setup-Exit
Move ...† 15min
Language
OSD Language English
Select OSD
Menu Language Default
Language
Subtitle Language Default
English
Audio Language Default
Spanish
Instructions
French
Enter-Confirm Setup-Exit
Czech
Move ...†
25