Using Bosch Vms Operator Client - Bosch DIP-7080-00N Installation Manual

DIVAR IP 7000 2U
5.6

Using Bosch VMS Operator Client

Use Bosch VMS Operator Client to verify the live, recording and playback functionality of
DIVAR IP.
To verify live image functionality in the Operator Client
1.
2.
3.
4.
To verify recording functionality in the Operator Client
4
To verify playback functionality in the Operator Client
4
To perform further functionalities refer to the Bosch VMS manual.
Performance overview live
Number of software
monitors
Number of software
monitors
Number of software
monitors
References to the manual are described in Additional documentation and client software, page
60.
Bosch Sicherheitssysteme GmbH
On the Bosch VMS default screen, double-click the Operator Client icon
application starts.
Enter the following and click OK.
User name: admin
Password: no password required (if not set with the wizard)
Connection: 127.0.0.1
Click the live image icon. The Logical Tree with the cameras is displayed.
Select a camera and drag it to an image window. The image of the camera is displayed if
the camera is assigned correctly.
Note:
Cameras in the image window with a red dot in the camera's icon are viewed live.
Cameras in the Logical Tree with a red dot in the camera's icon are recording.
The time line moves if the a camera is viewed in playback mode.
2.5 Mbit
2.5 Mbit
2.5 Mbit
5 Mbit
20 13
5 Mbit
14 11
5 Mbit
8
Installation Manual
System setup - first steps | en
4CIF
10 Mbit
720p
10 Mbit
1080p
10 Mbit
6
43
. The
9
6
5
2013.09 | V2 | DOC