Epson PowerLite 4100 Installation Handbook

Hide thumbs Also See for PowerLite 4100:

Download this manual See also: Operator's Manual, Installation Handbook

Epson PowerLite 4100 / 4200W / 4300

note

To order replacement air

lters, request part number

V13H134A17.

Cleaning the Air Filter

Your projector includes an air lter to ensure the best performance. If

dust collects on the air lter (on the side of the projector), you see a

message on the screen telling you to clean the lter, or

light ashes green, clean the lter. Dust clogs

prevent proper ventilation and can cause overheating, which can

damage the projector.

Follow these steps:

1. Press the P power button on the back of the projector to turn it

o . After the projector beeps twice, unplug the power cord.

2. Grip the air lter cover tab and remove the air lter cover as

shown.

3. Place your nger into the groove and remove the air lter as

shown.

INSTALLATION HANDBOOK

the

Temp

Maintenance

Page 1: Cleaning The Air Filter
INSTALLATION HANDBOOK Epson PowerLite 4100 / 4200W / 4300 Maintenance Cleaning the Air Filter Your projector includes an air lter to ensure the best performance. If dust collects on the air lter (on the side of the projector), you see a...
Page 2 INSTALLATION HANDBOOK Epson PowerLite 4100 / 4200W / 4300 Maintenance 4. With the front of the air lter facing down, tap it four or ve times to shake o the dust. Turn it over and tap the other side in the same way to shake o the dust.
Page 3: Replacing The Air Filter
INSTALLATION HANDBOOK Epson PowerLite 4100 / 4200W / 4300 Maintenance 8. If the dirt is di cult to remove, the lter is broken or discolored, or you continue to see air lter related messages even after cleaning, replace the lter as described in the next section.
Page 4 INSTALLATION HANDBOOK Epson PowerLite 4100 / 4200W / 4300 Maintenance 5. Slide the air lter cover in until it clicks into place.

Powerlite4200wPowerlite 4300