TG5480_QG(e).fm Page 1 Tuesday, March 8, 2005 5:17 PM
Quick Set-Up Guide
Please read the Operating Instructions for further details.
Step 1
To connect to a 2-line telephone jack
Fasten the AC adaptor
cord to prevent it from
being disconnected.
• USE ONLY WITH Panasonic AC ADAPTOR PQLV1.
• Use only the telephone line cord included in the unit.
• Make sure that the AC adaptor and telephone line cords are
plugged into the unit properly. Refer to pages 11 and 12 in the Operating Instructions.
To connect to 2 single-line telephone jacks (RJ11C),
refer to page 13 in the Operating Instructions.
Step 2
Install the battery.
Insert the battery (1), and
press it down until it snaps
into the compartment (2).
Close the cover.
Charge the battery
for 6 hours before initial use.
• The unit beeps once, the CHARGE indicator
lights and "Charging" is displayed.
• When the battery is fully charged, "Charge
completed" is displayed if there are no new
calls in the Caller List.
5.8 GHz Digital Cordless Answering System
Setting Up the Base Unit
4-Wire
Telephone Line
Cord with
GREEN Plugs
Setting Up the Handset
1
– 1 –
KX-TG5480
Model No.
2-Line
Telephone
Jack
(RJ14C)
AC Adaptor
2
CHARGE Indicator
PQQW13666ZA
SM0305SF0