The User Manual for the BDL4251VS, autostereoscopic 3D display, consists of the User Manual for the BDL4251V and this Addendum. This addendum states the deviations in the manual of the BDL4251VS compared to the BDL4251V. If not described in this addendum functionality and working of the BDL4251VS is the same as the BDL4251V.
User Manual BDL4251VS, Addendum to User Manual BDL4251V TABLE OF CONTENTS Contents ................................3
Connection & Button Overviews ........................... 3
Setup Procedure & Connecting a PC ........................4
Install the LCD Monitor in Portrait Mode ....................... 5
...
Connection & Button Overviews The BDL4251VS has two additional components mounted at the back of the display (both encircled in red in the picture below). The grey box at the right hand side is the Dimenco Rendering Core Premium, which is required to render 2D-plus-Depth input into a full 3D multiview signal.
User Manual BDL4251VS, Addendum to User Manual BDL4251V Setup Procedure & Connecting a PC Connecting to an external PC: Connect the provided DVI cable to the open DVI port on the blue rendering box at the backside of the display (positioned at the blue area in the picture) and to a PC with the following minimum requirements: 2 GHz processor, •...
User Manual BDL4251VS, Addendum to User Manual BDL4251V Install the LCD monitor in portrait mode The BDL4251VS in 3D mode cannot be used in portrait orientation; i.e. no 3D image will be visible upon using the display in portrait mode.