Philips DCP850 Service Manual page 11

4.0 MECHANICAL INSTRUCTION
13 To remove the key board, remove the
screws as shown in picture.
14 To remove the Ipod board, remove the
screws on slider cover and then remove
some tapes attached on middle cabinet
and wires.
15 To remove front cabinet, remove the screw
on display frame first. Carefully open the
display frame with the catches by
screwdriver. (There are six catches as
shown in picture)
16 To remove the TFT, de-soldering the wire
connected between TFT and TFT board
first. (Please note the wire location as
shown in picture during re-assembly)