Setup Field(S) - Motorola Symbol DS3408 Product Reference Manual

Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 15-2
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan Move Cursor To Character, then any printable ASCII
character from the Alphanumeric
to the position after the matching character. If the character is not
there, the rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential occurrences of
a selected character. For example, if the selected character is 'A',
then the cursor moves past 'A', 'AA', 'AAA', etc. Scan
Past Character, then select a character from the
Keyboard. If the character is not there, the cursor does not move
(i.e., has no effect).
Scan one of these bar codes to select the number of positions
ahead to move the cursor.
Scan one of these bar codes to select the number of positions back
to move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
7-20.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Advanced Data Formatting 15 - 31
Send Next 20 Characters
Description
Keyboard. This moves the cursor
Move Cursor
Alphanumeric
Table 7-4 on page
Page
15-32
15-32
15-32
15-33
15-34
15-36