Drive Chain Slack Adjustment
1. Loosen the four rear housing
mount bolts (two on each side).
2. Loosen the chain adjuster lock
nuts.
3. Turn the chain adjusters clockwise
to 1/4"-1/2" (6-12 mm) deflection.
4. Tighten the chain adjuster lock
nuts to 18 ft. lbs. (25 Nm). Hold
the adjuster stud securely while
tightening the nut to avoid break-
ing the stud.
5. Tighten the four rear housing
mount bolts to 43 ft. lbs. (60 Nm).
Chain Adjusters
MAINTENANCE
Housing Mount Bolts
63