Specifications; General Specifications - Yamaha 2005 BT1100 Supplementary Service Manual

GENERAL SPECIFICATIONS

Model code:
Dimensions:
Overall length
Overall width
Overall height
Seat height
Wheelbase
Ground clearance
Minimum turning radius
Weight:
Dry (without oil and fuel)
Wet (with oil and a full fuel tank)
Bias weight (dry) front
Bias weight (dry) rear
Bias weight (wet) front
Bias weight (wet) rear
Maximum load-except motorcycle:
Engine:
Engine type
Cylinder arrangement
Displacement
Bore stroke
Compression ratio
Compression pressure (STD)
Starting system
Lubrication system:
Engine oil:
Type
Temp.
Final gear oil:
Oil quantity:
Engine oil
Periodic oil change
With oil filter replacement
Total amount
Final gear case oil
Total amount

SPECIFICATIONS

Item
°C
GENERAL SPECIFICATIONS
BT1100: 5JN4
2,200 mm
800 mm
1,140 mm
812 mm
1,530 mm
168 mm
2,980 mm
233 kg
254 kg
109.5 kg
123.5 kg
122 kg
132 kg
200 kg
Air cooled 4-stroke,
SOHC
V-type 2-cylinder
1,063 L
95 75 mm
8.3 : 1
1,000 kPa (10 kg/cm
Electric starter
Wet sump
SAE20W40SE or SAE10W30SE
Recommended engine oil classification:
API Service SE, SF, SG or higher
Hypoid gear oil SAE 80 (API GL4)
3.0 L
3.1 L
3.6 L
0.2 L
1
SPEC
Standard
2 , 10 bar) at 400 r/min