Bu Check Flow [Zz]; Bu (Optical Block) Repair Guide - Sony BDP-BX18 Service Manual

1-4-3. BU Check Flow [zz] ~

Optical Block Unit (BU) IOP check flow (zz) ~ [Before BU Replacement]
Press
Select [2] d,OP then press 'ENTER'

1-4-4. BU (Optical Block) Repair Guide

BDP 6.9G (B D P-S1 8 5 ) s
However BD player requires precise read out functions and also secure contents Protection
system.
Since above requirement, it is necessary to set/adjust BU data to EEPROM.
The following cases need Adjustments;
(1)Replace BU (MB is original)
(2)Replace MB (BU is original)
(3)Replace both BU and MB
‡-,G Requirement
Digital camera (recommend with macro mode)
Barcode decoder (BDPRdec_ver2.0 ) installed in -,G PC's
USB memory
ESD work bench
‡3URFHGure (all cases)
Remarks:
The servo adjustment procedure will be carried out during OP data Writing.
There is no manual adjustment procedure. LD ON TIME history doesn't carry over.
Do not touch any optical block parts, Turn Table and during replacing. BD Laser diode
is very sensitive!
Before BU Replacement
Enter Service Mode
<OPEN/CLOSE>., <PLAY>,<STOP>
and plug in AC Power
,nside *Service Mode Menu
Select [8] Drive
,nside *Drive
Select [7] OP Check Menu
,nside *OP Check Menu
Specification d,OP
+ -
BD: 6mA
+ -
DVD, CD: 9mA
YES
AC Power OFF
e ries component structure is as same as conventional DVD Players.
Refer the diagram
NO
,OP out of specification need BU
replacement
Optical Block Unit (BU) replace
(Flowchart yy)
1-16
BDP-BX18/S185/S186
~