Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
SERVICE MANUAL
Digital Camera
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2
2. DISASSEMBLY ........................................................ 10
3. ELECTRICAL ADJUSTMENT .................................. 12
REGISTRATION ...................................................... 17
5. TROUBLESHOOTING GUIDE ................................. 18
6. PARTS LIST ............................................................. 20
ACCESSORIES ....................................................... 20
PACKING MATERIALS ............................................ 20
CABINET & CHASSIS PARTS 1 ............................. 20
ELECTRICAL PARTS .............................................. 24
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...................................... C1
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part
designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
SX71B/EX, EX2, U
PRODUCT SAFETY NOTICE
FILE NO.
VPC-S5
(Product Code : 168 008 00)
(Europe)
(Korea)
(Taiwan)
(General)
VPC-S5BK
(Product Code : 168 008 03)
(Europe)
(Korea)
(Taiwan)
(General)
VPC-S5U
(Product Code : 168 008 01)
(U.S.A.)
(Canada)
REFERENCE No. SM5310612
Advertisement
Table of Contents
Related Manuals for Sanyo VPC-S5
Summary of Contents for Sanyo VPC-S5
-
Page 1: Table Of Contents
FILE NO. SERVICE MANUAL Digital Camera VPC-S5 (Product Code : 168 008 00) (Europe) (Korea) (Taiwan) (General) VPC-S5BK (Product Code : 168 008 03) (Europe) (Korea) (Taiwan) (General) Contents VPC-S5U 1. OUTLINE OF CIRCUIT DESCRIPTION ....2 2. DISASSEMBLY ............10 (Product Code : 168 008 01) 3. -
Page 2: Outline Of Circuit Description
1. OUTLINE OF CIRCUIT DESCRIPTION Pin 10 1-1. CP1 CIRCUIT DESCRIPTION 1. IC Configuration IC903 (MN39620PJJ) CCD imager IC901 (AN20101A) V driver IC906 (AD9948KCPZ) CDS, AGC, A/D converter Pin 1 2. IC903 (CCD) [Structure] Fig. 1-1.Optical Black Location (Top View) Interline type CCD image sensor Optical size 1/2.5 type format... - Page 3 3. Part of IC906 (H Driver) and IC901 (V Driver) 4. IC906 (H Driver, CDS, AGC and A/D converter) An H driver (part of IC906) and V driver (IC901) are neces- IC906 contains the functions of H driver, CDS, AGC and A/D sary in order to generate the clocks (vertical transfer clock, converter.
- Page 4 6. Circuit description 7. Outline of Operation 6-1. Digital clamp When the shutter opens, the reset signals and the serial sig- The optical black section of the CCD extracts averaged val- nals (“take a picture” commands) from the 8-bit microproces- ues from the subsequent data to make the black level of the sor are input to ASIC (IC101) and operation starts.
- Page 5 1-2. CP1 POWER CIRCUIT DESCRIPTION 1. Outline 4. Digital 3.25 V Power Output This is the main power circuit, and is comprised of the follow- +3.25 V (D) is output. Feedback for the +3.25 V (D) is pro- ing blocks. vided to the switching controller (Pins (23) of IC501) so that Switching controller (IC501) PWM control can be carried out.
- Page 6 1-3. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When RDY and TRIG signals are input from the ASIC expan- CHG signal from microprocessor becomes High (3.3 V), the sion port, the stroboscope emits light.
- Page 7 1-4. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1.
- Page 8 BACKUP CTL Backup battery charge control AVDD AVREF Analog standard voltage input terminal Table 4-1. 8-bit Microprocessor Port Specification 2. Internal Communication Bus The SYA block carries out overall control of camera operation by detecting the input from the keyboard and the condition of the camera circuits.
- Page 9 4. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached, IC955 is operating and creating 3.7 V, a regulated 3.2 V voltage is normally input to the 8-bit microprocessor (IC301) by IC302, clock counting and key scanning is carried out even when the power switch is turned off, so that the camera can start up again.
-
Page 10: Disassembly
2. DISASSEMBLY 2-1. REMOVAL OF CABINET BACK AND CABINET FRONT 1. Five screws 1.7 x 4.5 2. Open the cover battery. 3. Cabinet back 4. Cabinet front NOTE: Discharge a strobe capacitor with the discharge jig (VJ8-0188) for electric shock prevention. –... - Page 11 2-2. REMOVAL OF LCD, CP1 BOARD, TB1 BOARD, ST1 BOARD, LENS ASSEMBLY, TB2 BOARD AND BOARD LOCATION TB1 board ST1 board 1. FPC 14. CP1 board 2. Connector 15. Two screws 1.7 x 4 3. LCD 16. Earth plate 4. Three screws 1.7 x 4 17.
-
Page 12: Electrical Adjustment
3. ELECTRICAL ADJUSTMENT 6. LCD Panel Adjustment 3-1. Table for Servicing Tools 6-1. LCD VcomPP Adjustment Part code 6-2. LCD VcomDC Adjustment Ref. No. Name Number Note: If the lens, CCD and board in item 2-5, it is necessary Pattern box (color viewer) VJ8-0190 to adjust again. - Page 13 3-5. Connecting the camera to the computer 1. Line up the arrow on the cable connector with the notch on the camera's USB port. Insert the connector. 2. Locate a USB port on your computer. To USB port USB cable AC adaptor –...
- Page 14 Preparation: 3-6. Adjust Specifications POWER switch: ON [CP1 board (Side B)] Adjustment condition: More than A3 size siemens star chart Fluorescent light illumination with no flicker Illumination above the subject should be 400 lux ± 10 %. Adjustment method: 1. Set the siemens star chart 60 cm so that it becomes center of the screen.
- Page 15 5. CCD Black Point And White Point Defect Detect Preparation: Adjustment In Lighted POWER switch: ON Adjusting method: 1. When setting the camera in place, set it to an angle so that nothing appears in any part of the color viewer except the white section.
- Page 16 3-7. Factory Code Setting 1. Check the "Factory Code" display within the Setting group. 2. For U.S.A., Canada and NTSC general area If "FC_SANYO_U" does not appear, click on the " " mark located on the right of the "Factory Code" display BOX and 5.60 V select "FC_SANYO_U".
-
Page 17: Usb Storage Information Registration
1. Overwriting firmware from the SD card 3. Click on the Get button in the USB storage window and Preparation: check the USB storage data. SD card: SD card with firmware rewritten into the root direc- VID: SANYO tory PID: S5 Data: S71BNxxx.BIN (xxx: version) Serial: Overwriting method: Rev. -
Page 18: Troubleshooting Guide
5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH RELEASE PUSH THE POWER SWITCH SB LED IS FLASHING STROBE CHARGE IC301-15 CHECK SYA BLOCK WHEN AUTO INOPERATIVE (SCAN IN 0) LUMINOUS (RED) CHECK STA BLOCK PULSE INPUT CN301-5, 6 CHECK IC302-7 CHECK (SCAN IN 1, 2) - Page 19 MEMO...
-
Page 20: Parts List
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION 9001 645 075 4241 DISC,CD-ROM SSP 71B U (N.S.P.) 636 086 4061 DEC LENS-SX71B/EX,VPC-S5 ONLY 9051 636 086 3194 INSTRUCTION MANUAL 636 086 4764 DEC LENS-SX71B/U,VPC-S5U,VPC-S5BK (Camera software: English) 636 078 2426... - Page 21 ACCESSORIES 9001 9060 9061 CABINET AND CHASSIS PARTS 1 SX71B/EX Parts List 1...
-
Page 22: Cabinet & Chassis Parts 2
SPACER SPRING EARTH-SX71B 636 086 1015 DEC LENS FRONT-SX71B/EX 636 078 2471 HOLDER CHASSIS-SX715/EX 645 066 6308 LENS(ASSY),VJ587900 636 086 4115 STAND-SX71B/EX, VPC-S5 ONLY 645 075 4753 OPTICAL FILTER 636 086 4863 STAND-SX71B/U, VPC-S5U,VPC-S5BK 636 085 1863 SPACER SX71B 645 068 7112... - Page 23 CABINET AND CHASSIS PARTS 2 SX71B/EX Parts List 2...
-
Page 24: Electrical Parts
ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT... - Page 25 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION L1102 645 020 1899 INDUCTOR,68 OHM C3017 403 346 2309 CERAMIC 0.1U K 10V L1103 645 020 1899 INDUCTOR,68 OHM C3018 403 346 2309 CERAMIC 0.1U K 10V L1104 645 066 4724 IMPEDANCE,600 OHM P C5002 403 340 6907...
- Page 26 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION RB109 645 061 3722 R-NETWORK 47KX2 1/16W R5020 401 224 9006 MT-GLAZE 10K JA 1/16W RB110 645 028 0719 R-NETWORK 10KX4 1/32W R5021 401 262 4100 MT-FILM 11 DD 1/16W RB130 645 061 3692 R-NETWORK 27X2 1/16W R5022 401 258 7009...
- Page 27 LOCATION PARTS NO. DESCRIPTION COMPL PWB,TB-2 636 086 2234 (DIODE) D6601 407 232 2503 LED SML-512UW-T86, (MISCELLANEOUS) 636 085 5380 ASSY,WIRE CP1&TB2-SX71B (N.S.P.) 636 085 5397 ASSY,WIRE CP1&TB2-SX71B (N.S.P.) COMPL PWB,ST-1 636 086 2210 (SEMICONDUCTORS) Q5401 405 115 7508 TR DTC123JE Q5402 405 169 4508 TR DTC114EM...
- Page 28 SANYO Electric Co., Ltd. Osaka, Japan Jan./’05 Printed in Japan...