PCG-GRZ230/GRZ270 SERVICE MANUAL For American Area Latin Model Ver 4-2007D Revision History S400 Lineup : PCG-GRZ270 PCG-GRZ230 Illust : PCG-GRZ270 • Design and specifications are subject to change without notice. NOTEBOOK COMPUTER 9-876-070-04...
Page 2
Caution Markings for Lithium/Ion Battery - The following or similar texts shall be provided on battery pack of equipment or in both the Sony, VAIO and CLIE are trademarks or registered trademarks of operating and the service instructions. Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks CAUTION: Danger of explosion if battery is incorrectly replaced.
TABLE OF CONTENTS Section Title Page CHAPTER 1. BLOCK DIAGRAM ....... 1-1 (to 1-2) CHAPTER 2. FRAME HARNESS DIAGRAM ..2-1 (to 2-2) CHAPTER 3. EXPLODED VIEWS AND PARTS LIST ..........3-1 3-1. Main Section ..............3-2 3-2. LCD Section – Made by HI – .......... 3-5 3-3.
SMBUS 2 SMBUS2 IM I 15inch XGA 593 FCBGA 478pins 9870GT D Port Repricator DDR(SO-DIMM) uFCPGA SONY Re fer to Clock Generator TV-Out Block Diagram LCD CONN Cable USB Righ t Port -0 Li n eOut CONN Total max memory size...
CHAPTER 3. EXPLODED VIEWS AND PARTS LIST NOTE: • Items marked “ * ” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied.
Page 8
Supplied with 3 (GRZ270 Model) Supplied * 3 (Type To/So) with 15 [DEL] (Type To Only) (* 2) 73(* 1) (Type To Only) [ADD] Supplied [ADD] with 67 * 3 (Type Pa) ∗3 By referring to “[How to identify the So and Pa types of parts] (page 3-1), use the So type parts when replacing the So type optical drive, and use the Pa type parts when replacing the Pa type optical drive.
3-3. Connector Section (CH Type only) Ref.No. Fig. Part No. Description 1-817-023-11 [CH]...CONNECTOR, USB USB connector 1-779-745-21 [CH]...JACK, DC DC IN connector X-4625-501-1 [CH]...BRACKET IO ASSY I/O Bracket ∗ Among the parts that are used on the boards of this model, only the connectors that are show in the list can be replaced.
CHAPTER 4. OTHERS 4-1. Replacing the CPU 1. Removing the CPU 1 Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the protrusion comes to the lock release position. 2 Pull the CPU gently upward to lift it out of the CPU socket. Lock position CPU socket Lock release position...
Revision History Suffix Ver. Date Contents QM No. Ver. 1 2003.02.21 First Edition Ver. 2 2004.02.27 Front Page, Page 3-2, Page 3-4, Back Cover N2004_026CK Ver. 3 2004.05.01 *3 The CRP information has been added to the PARTS LIST – Ver.