Table of Contents
Advertisement
QQ
3 7 63 1515 0
Adjustment Procedure
1. Press HPOSI in the Test Mode Menu screen.
2. Adjust Horizontal display start position for the following four:
Graphic, TV, VIDEO, and Navigation.
2-1. Graphic, VIDEO, and TV
Adjust with OSD-key so that the background blue cannot
be seen on both sides of the screen.
* HPOSI-key is not to be used. Note that the key can be
operated on. Previous values should be re-input if an er-
ror is made. (Pressing Cancel key would not correct the
error. )
NG
After adjustment, press Next-key and move to the next ad-
justment screen.
2-2. NAVI
Adjust with OSD-key so that background NAVI screen is
TE
L 13942296513
not seen on both sides of the screen.
* HPOSI-key is not to be used. Note that the key can be
operated on.
If an error in operation is made, press Cancel key and re-do
from the beginning. (With MP, there is a possibility for us-
ing the HPOSI-key. )
NG
NG
After adjustment press Next-key and if "Hposi OK" is dis-
played, adjustment is complete.
www
.
ADJUSTMENT
NG
OK
Right/Left symmetry
OK
x
ao
u163
y
i
KVT-M707/M707Y
2 9
8
Touch Panel Adjustment
Adjustment Procedure
1. Press the Touch Key in the Menu screen of the Test Mode
and enter the Touch Panel Adjustment screen.
2. Touch the center section of the "+" mark below in the follow-
ing order.
Upper left → Upper right → Lower left
When making the touch, be use to use the touch stick des-
ignated.
3. After adjusting at 3 points, when "Write OK" is displayed,
the adjustment is complete.
By pressing "Return", Touch adjustment will be exited.
Cancel
* If the central section of the "+" mark has not be pressed
accurately, press "Cancel" and re-do from the beginning.
Note:
As far as the Touch Panel Adjustment data is concerned,
Q Q
3
6 7
1 3
1 5
the data is finalized when the touch is let go.
For this reason, the knack for adjustment is not to let go the
touch after touching the center section of the "+" mark.
After making the touch, first confirm that the touch is at the
dead center of the "+" mark. (This means that, if the touch is
not at the dead center of the "+" mark, maintain the touch,
and slide the stick to the dead center of the "+" mark.)
Then, let the touch go quickly, vertically upward.
co
.
9 4
2 8
Cancel
Cancel
0 5
8
2 9
9 4
2 8
m
9 9
9 9
27
Advertisement
Table of Contents
