Battery Tray Installation; Hanger Kit Installation - Hitachi E40 Safety Instructions And Instruction Manual

BATTERY TRAY INSTALLATION

RECOMMENDED BATTERY for E57(S3P)
Recommended battery:
Capacity: 12V/26A·h
NOTE:
Clamp the wire of red sign to the positive (+)
terminal and the black wire to the negative (–)
terminal of the battery. Do not reverse these
positions.
Be sure the battery is installed on the battery
mount tray securely.

HANGER KIT INSTALLATION

(Optional)
1. Position the Hanger
balance point as shown in Fig. 14.
2. Fit the end tabs of the Hanger brackets
through the Hanger
Hanger brackets
②
the four M6 x 15 mm Bolts
securely.
Parts Number: KY90077AA
at the generator's
③
②
slots, and bolt the
③
to the Hanger using
③
and tighten
①
Red sign
Fig. 13
The side of Alternator
Fig. 14
English
F B
①
②
③
11