D-Link DSL-2750U User Manual page 125

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
You can specify the following parameters:
Parameter
Name
Type of group
Figure 91. The page for adding a new group of ports.
A name for the group for easier identification. You can specify any
name.
The type of the group.
NAT. The group of this type is an external connection with address
translation. It is mostly used to connect to the Internet. You can
assign any WAN connection except for the Bridge WAN
connection to the group of this type.
Transparent bridge. The group of this type is a transparent
connection between an internal port and an external connection. It is
mostly used to connect IPTV set-top boxes. You can assign only the
Bridge WAN connection to the group of this type.
Local. The group of this type is a channel used to connect local
clients to the router. It is mostly used to connect different types of
clients, which require separate connection settings. You cannot
assign WAN connections to the group of this type.
Page 125 of 182
Configuring via Web-based Interface
Description