Trouble Shooting Guide - Sanyo TIC-C300E Instruction Manual

Trouble Shooting Guide

Make following simple checks before asking for Service.
Never remove or interfere with any parts or screws. THIS COULD PROVE VERY DANGEROUS.
If the cooktop does not operate.
Lamps are lit but the cooktop does not work.
ON lamp flashes and beep sounds.
The cooktop automatically stops after 1 minute.
ON lamp turns off, but power level lamp lights.
In the following cases, immediate repair is necessary. Remove power plug and contact Sanyo Service centre.
Power cord is damaged.
Power plug / power cord become abnormally hot.
Electrical power stops and starts when power cord is touched.
A split or crack occurs in top plate.
Cooling fan does not rotate.
9
• Check that power plug is properly plugged into the AC wall
socket.
• Remove power plug and plug into the AC wall socket.
• Is pot or pan placed on top plate?
• Is pot or pan usable? (see page 14)
• Is pot or pan positioned properly in centre of top plate?
• Are air inlet and/or outlet covered?
• Are air inlet and/or outlet blocked by dust or dirt?
• Is the room temperature very high?
• Is an empty pot or pan being heated?