Advertisement
PREPARATION FOR USE
Insert the key and turn clockwise to turn the
machine "ON".
Select the "Click-on" "Click-off" brush system by
pressing push marked C,
Press the lower push of the group of three marked
ON/OFF. This starts the brush motors rotating and
the scrubbing head winding down to engage the
brushes. When the brushes have engaged, the
scrubbing head then winds upwards to its rest
position.
Having mounted the brushes, now press the
button marked "C" again to exit the "Click-on"/
"Click-off" system.
10
USING THE MACHINE
The squeegee can be adjusted for pressure
against the floor by turning the lower of the two
plastic knobs just above the squeegee bracket.
The rake angle can be adjusted to make the
squeegee sit fully on the floor by adjustment of the
upper knob.
When the recovery tank becomes full an indicator
will start flashing on the panel, if this remains on
for longer than 5 seconds the suction motor will
switch off and the squeegee raise. It is now
necessary to empty the tank.
The recovery tank dump valve is situated at the
lower rear of the machine to which the dump hose
may be attached.
15
Advertisement
