Table of Contents
Advertisement
Answering System Setup & Programming
Audible Quick Setup Guide
If you need additional assistance; while in standby mode, press the ans. menu button
on the base and follow the voice instructions.
Set Answering System ON/OFF
Upon initial power up and activation, the answering system is in the ON mode.
1. Press the ans. menu button. The system announces "Answerer ON (or OFF)",
4
| skip or|
press the
NOTE: When the system is in OFF mode; the indicator displays OFF.
. Press the ans. menu button to confirm your setting.
Setting the Voice Prompt Language
1. Press the ans. menu button repeatedly until the system announces "You have XX
messages." The message indicator displays LA.
. After a one second delay, the indicator displays the language code, 1 (for English)
or (for French).
4
| skip to choose your desired selection. The answering system
. Press the
announces the current new message status in the selected language.
4. Press the ans. menu button to confirm the setting.
Day/Time
The day/time code on the answering system is independent of the date/time shown
on the base display. You must program the answering system's day/time in order to
have an accurate time for message receipt.
1. Press the ans. menu button repeatedly until the system announces day and time.
4
| skip or|
. Press the
message indicator displays 'd' and a number, 1 to 7,representing the day of the
week (1 represents Monday; represents Tuesday, etc.). Press the ans. menu
button to confirm.
4
| skip or|
. Press the
am or pm correctly.
4. Press the ans. menu button to confirm.
4
| skip or|
5. Press the
digit, the selection is 0 through 5, as the minutes range from 00 to 59. Press the
ans. menu button. Next program the second digit, the choices are 0 through 9.
3
repeat button to switch between ON and OFF.
3
repeat button to program the Day. As you program, the
3
repeat button to program the Hour. Remember to program
3
repeat button to program the Minutes. To program the first
7
Advertisement
Table of Contents
