Electrical System; Checking And Charging The Battery; Checking The Fuses - Yamaha 2007 XP500 Service Manual

EAS21750

ELECTRICAL SYSTEM

EAS21760

CHECKING AND CHARGING THE BATTERY

Refer to "ELECTRICAL COMPONENTS" on
page 8-97.
EAS21770

CHECKING THE FUSES

Refer to "ELECTRICAL COMPONENTS" on
page 8-97.
EAS21790
REPLACING THE HEADLIGHT BULBS
The following procedure applies to both of the
headlight bulbs.
1. Remove:
Front cowling
G
Refer to "GENERAL CHASSIS" on page 4-1.
2. Disconnect:
Headlight coupler "1"
G
3. Remove:
Headlight bulb holder "2"
G
4. Detach:
Headlight bulb holder "1"
G
5. Remove:
Headlight bulb "2"
G
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
2
2
1
1
ELECTRICAL SYSTEM
6. Install:
Headlight bulb
G
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
7. Install:
Headlight bulb holder cover
G
8. Connect:
Headlight coupler
G
9. Install:
Front cowling
G
Refer to "GENERAL CHASSIS" on page 4-1.
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Adjust:
Headlight beam (vertically)
G
MMMMMMMMMMMMMMMMMMMMMM
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
LLLLLLLLLLLLLLLLLLLLLL
2. Adjust:
Headlight beam (horizontally)
G
MMMMMMMMMMMMMMMMMMMMMM
a. Turn the adjusting knob "2" in direction "c" or
"d".
3-32
New