Nokia N92 RM-100 Service Manual page 21

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
7. Carefully twist the connector of the Coax Cable. Now pull
the cable while slotting the connectors through the recess of
the Hinge Module Assy.
9. Do the same with the second Coax Cable.
11. Do the same with the second Coax Cable.
Service Manual N92 RM-100
Page 21 (53)
CONFIDENTIAL
8. Note that the cables are not squeezed during this procedure.
10. Carefully twist the connector of the Coax Cable. Now pull the
cable while slotting the connectors through the second recess of
the Hinge Module Assy.
12. Now the disassembly of the Hinge assy is completed.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
17.Okt.2006