Zero Configuration Setup - D-Link ShareCenter DNS-327L User Manual

Section 2 - Getting Started

Zero Configuration Setup

If you have a mydlink-enabled cloud router (DIR-808L, DIR-810L, DIR-820L
DIR-850L, DIR-860L, DIR-868L, DIR-865L, DIR-855L, DIR-836L), you can take
advantage of Zero Configuration setup. Zero Configuration automatically
configures your NAS's settings for you, and adds it to your mydlink account.
This type of setup allows you to set up your DNS-327L by simply plugging it
in and connecting it to your mydlink-enabled router.
Connect your NAS to your mydlink-enabled cloud router and Zero Configu-
ration will automatically configure your DNS-327L and automatically add it
to your mydlink account. After the short time it takes to do this you can re-
motely access your NAS from the www.mydlink.com website to manage and
monitor your DNS-327L.
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the DNS-327L. Plug the
other end into an available port on your router. If you wish to use your NAS
wirelessly, you will be able to remove the cable from the router after Zero
Configuration Setup is complete.
D-Link ShareCenter DNS-327L User Manual 18