Lenovo NETWORK CARD - WIRELESS ADAPTER MW600-B-LO User Manual page 16

• WPA-Enterprise
• 802.1x
Based on the selected security type, you can configure either a network security
key or specify and configure a network authentication method. If you specify
WPA-Enterprise, WPA2-Enterprise, or 802.1x as your security type, you must
configure the following (as shown in the previous figure):
• Choose a network authentication method Select an Extensible Authentication
Protocol (EAP) method and click Settings to configure the EAP type as needed.
• Cache user information for subsequent connections to this network
Specifies that when the user logs off, the user credential data is removed from
the registry. The result is that when the next user logs on, they will be prompted
for their credentials (such as user name and password).
If you specify the use of WPA-Personal or WPA2-Personal as your security
type or No authentication (Open) or Shared as your security type with WEP as
your encryption type, you must configure a network security key, as shown in the
following figure.
You do not need to configure a network security key for the WPA2-Enterprise,
WPA-Enterprise, and 802.1X security types because the key is determined
31036026_MW600_UG_EN.indd 13
MW600-B-LO Wireless 802. 11b/g wireless PCI-E Adapter Card
13
2008.11.7 10:59:31 AM