Display Assembly Subcomponents - HP Pavilion 14 Maintenance And Service Manual

Display assembly subcomponents

NOTE: These procedures are for replacing the display assembly internal components. The display is spared
only at the subcomponent level.
Component
Webcamera/microphone module (includes adhesive and screws)
Display panel cable (includes webcamera/microphone module cable and screws)
Antenna Kit (includes screw and Mylar tape)
Display Hinge Kit (includes left and right hinges and screws)
Display back cover (includes screws):
Before removing the display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service door (see
b. Memory module (see
c. WLAN module (see
d. Optical drive (see
e. Keyboard (see
f. Top cover (see
g. Hard drive (see
h. System board (see
Remove the display assembly subcomponents:
1. Remove the display by removing the five Phillips PM2.5×6.5 screws (1) that secure the display
assembly to the base enclosure.
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 25), and then remove the following components:
Service door on page 26)
Memory module on page
WLAN module on page
Optical drive on page 32)
Keyboard on page 34)
Top cover on page 41)
Hard drive on page 44)
System board on page
28)
30)
52)
Spare part number
776787-001
734407-001
788630-001
734408-001
785282-001