Motorola MOSCAD Owner's Manual page 4

Connection to MOSCAD-L Unit
The following figure describes the connection of the external Ethernet unit to the MOSCAD-L CPU
module. Note that the number shown next to an item is the kit number.
12VDC from the AUX outlet in
MOSCAD -L Power Supply
Ethernet Unit
* When radio is installed in the MOSCAD-L unit, use double head cable (FKN4887A)
** Install Suppression Core (Fair-Rite) P.N 044316415 on cable, used for LAN connection
*** Use shielded cable for LAN connection
Connection of the External Ethernet Unit to the MOSCAD-L CPU Module
Mounting the Ethernet Unit in MOSCAD-L Box
The following figure shows the two mount locations of the Ethernet unit in MOSCAD-L box.
On-door: the Ethernet unit is
mounted using bracket and
screws (FHN6122A)
Mount Locations of the Ethernet Unit in MOSCAD-L Box
FKN4465A*
FKN5953A
Suppression Core
(Fair-Rite) **
To LAN ***
In-box: the Ethernet unit is
mounted using bracket and
screws (FHN6103A)
4
Use Port 1 or Port 2 -
RS232 connectors
Use Port 3 when an
internal programmable
RS232 board
(FRN5724A) is installed
CPU Module
Power
Supply
Cable
Suppression
Core
(Fair-Rite)
Close
Install Suppression Core (Fair-Rite)
P.N 0444164281 on power supply
cable, located between the
transformer and the CPU module.