Programming The Hybrid Ip-Pbx - Panasonic KX-TDA100 Getting Started

4.3

Programming the Hybrid IP-PBX

Starting the KX-TDA Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and
connect to the Hybrid IP-PBX for the first time after initialisation (with the factory default setting),
Quick Setup will launch automatically. During Quick Setup, you will set up the basic items. For details
about the basic items, refer to "2.3.4 Quick Setup" in the Feature Guide.
1. Connect the PC to the Hybrid IP-PBX with a USB
cable.
2. Start the KX-TDA Maintenance Console from the
Start menu.
3. "Information Before Programming" appears.
a.
Carefully read this important additional
information, which includes updates to this and
other manuals.
b.
Click [OK] to close this window.
4. a.
Enter the Installer Level Programmer Code
(default: INSTALLER).
b.
Click [OK].
Click "Connect" → "USB" or "RS-232C" from the
5.
menu bar, depending on the serial interface
connection with the Hybrid IP-PBX.
6. a.
Enter the system password for installer (default:
1234).
b.
Click [OK].
4.3 Programming the Hybrid IP-PBX
Getting Started 21