Screws; Disassembly Procedures; Carriage Lock Release - Epson Perfection 1250 Service Manual

EPSON Perfection 1250/1250 PHOTO

4.1.2 Screws

See the tables below if you've forgotten where to put a particular screw.
Screws are referred to by number throughout the disassembly instructions.
Table 4-2. Screw Name Abbreviations
Abbreviation
CBP
CBB
Table 4-3. List of Screw Types
No. Specification
1 CBP(M3x8)
2 CBB(M2.5x12)
Screw Name
P-type cross-head binding screw
B-type cross-head binding screw
Shape

4.2 Disassembly Procedures

This section describes the disassembly and removal procedures for each
major component of the scanner.

4.2.1 Carriage Lock Release

1. Disconnect the power cable from the scanner.
2. Make sure the carriage lock at the rear of the scanner is in the released
position.
Locked Position
Figure 4-2. Carriage Lock Position
C A U T I O N Before relocking the carriage to transport the scanner,
make sure that the carriage is in the home position.
Disassembly and Assembly
Released Position
30