Related Manuals for Kenwood DDX7015BT
Summary of Contents for Kenwood DDX7015BT
- Page 1 DDX7015BT DDX5015BT DDX5015DAB DDX5015BTR MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © 2014 JVC KENWOOD Corporation B5A-0377-00 (EN/QN)
-
Page 2: Table Of Contents
The marking of products using lasers How to read this manual: • Illustrations of DDX7015BT are mainly used for explanation. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be The label is attached to the chassis/case and says different from the actual displays or panels. -
Page 3: How To Reset Your Unit
– Pictures may not appear clearly or may move Contact your local authority for details in locating a DDX7015BT slowly. Pictures may not be synchronized with recycle facility nearest to you. the sound or picture quality may decline in such Proper recycling and waste disposal will help environments. -
Page 4: Initial Settings
• You can also change the settings on the <Setup> screen. (Page 51) The <TOP MENU> screen is displayed. * Only for DDX7015BT . Setting the security function • To clear the registered security code, perform Registering the security code steps 1 and 2, then press [CLR] in <Security... -
Page 5: Activating The Security Function
The security indicator on the monitor panel flashes when the vehicle ignition is off. Finish the procedure. To deactivate the security function: Select [OFF] for <SI>. Appears only when the navigation unit is connected. Only for DDX7015BT/DDX5015BT/DDX5015BTR . Only for DDX5015DAB. ENGLISH... -
Page 6: Basics
4 B MENU button (Page 9) • Turns on the power. (Press) (Page 7) • Displays the <TOP MENU> screen. (Press) DDX7015BT • Turns off the power. (Hold) (Page 7) (Page 9) 8 TEL/VOICE button • Turns on the power. (Press) (Page 7) •... -
Page 7: Common Operations
BASICS BASICS Adjusting the volume Adjusting the panel angle (only for Common operations DDX7015BT ) To adjust the volume (00 to 35) Turning on the power DDX7015BT Display the <Angle Adjust> screen. DDX7015BT On the <TOP MENU> screen: • Press [K] repeatedly to change the page on Press J to increase, and press K to decrease. -
Page 8: Common Screen Operations
BASICS BASICS Putting the unit in standby Turning off the screen Common screen operations DDX7015BT* Display all <TOP MENU> items. Common screen descriptions On the <TOP MENU> screen: You can display other screens any time to change (Hold) the source, show the information, or change the DDX5015DAB/DDX5015BT/ settings, etc. - Page 9 BASICS BASICS Easy control screen <Setup> screen Touch screen operations Pressing [ ] switches between the normal source Changes the detailed settings. (Page 51) control screen and easy control screen. The easy control screen allows you to control the source easily with simple buttons. •...
-
Page 10: Selecting The Playback Source
BASICS BASICS [HDMI/MHL] Using short-cut buttons Plays a device connected to Selecting the playback source the HDMI/MHL input terminal. While displaying the source control screen or the (Page 33) On the <TOP MENU> screen: <Setup> screen, you can use the short-cut buttons [AUPEO!] Switches to the AUPEO! to go to the items on the <TOP MENU>... -
Page 11: Discs
• If the ejected disc is not removed within 60 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. Closing the monitor panel (only for DDX7015BT ) After removing the disc, press M on the monitor DDX5015DAB/ panel. - Page 12 DISCS DISCS Operation buttons For audio playback Operation buttons • Available buttons on the screen and operations • Available buttons on the screen and operations differ depending on the type of disc/file being differ depending on the type of disc/file being played back.
- Page 13 DISCS DISCS Selecting a folder/track on the list Video menu operations [ZOOM] Displays the picture size selection screen. (Page 47) You can display the video menu screen during video [Aspect] Selects the aspect ratio. playback. (Page 47) • The operation buttons disappear when the screen [PictureAdjust] Displays the picture adjustment is touched or when no operation is done for about Select the folder (1), then the item in the...
- Page 14 DISCS DISCS For VCD To select a track directly on a VCD Selecting playback mode Selects Repeat playback mode. ] Selects Random playback mode. • Available playback modes differ depending on the type of disc/file being played back. • You cannot activate the repeat mode and the [ZOOM] Displays the picture size selection random mode at the same time.
-
Page 15: Settings For Disc Playback
DISCS DISCS Setting the parental lock <Angle Settings for disc playback Select whether to display the angle The parental lock cannot be set during DVD Mark> mark. playback. • ON (Initial): Select this to display Display the <Parental Pass> screen. the angle mark. -
Page 16: Usb
[O] [N] Reverse/forward search. Indications and buttons on the source Connecting a USB device [IW] Starts/pauses playback. control screen You can connect a USB mass storage class device Displays other operation buttons. such as a USB memory, Digital Audio Player etc. to •... -
Page 17: Ipod/Iphone
iPod/iPhone iPod/iPhone Setting <Picture Display Time> • On the <Category List>/<Folder List>: You Preparation can switch the file type to list: Press [ ] to list Set the interval between slides during slide-shows of Connecting iPod/iPhone audio files, [ ] to list video files, or [ ] to the picture files. - Page 18 iPod/iPhone iPod/iPhone Bluetooth connection Selecting the iPod/iPhone device to Select the connection method (1), then Pair the iPod/iPhone through Bluetooth. (Page 35) play and connection method press [Next] (2). • For iPod nano (7th Generation)/iPod touch (5th Generation)/iPhone 5S/iPhone 5C/iPhone 5: To When connecting the iPod/iPhone device for watch video, connect your iPod/iPhone to the first time, the setup screen (for connection, etc.)
-
Page 19: Playback Operations
iPod/iPhone iPod/iPhone Selecting preference settings for iPod/ When selecting <HDMI + Bluetooth> or Playback operations <Bluetooth> as the connection method, iPhone playback the device selection screen appears. When the source is “iPod”... When the operation buttons are Search for the available iPod/iPhone not displayed on the screen, touch the area shown on the illustration. - Page 20 iPod/iPhone iPod/iPhone Operation buttons Selecting an audio/video file from the Video menu: Displays the easy control screen. menu (Page 9) Displays the audio/video file list. (See the right column.) [S] [T] Selects an audio/video file. Select the menu ( : audio or : video) [O] [N] Reverse/forward search.
-
Page 21: Apps
• For Bluetooth connection, see page 37. Operation buttons on the source listening to another source Select the iPod touch/iPhone/Android control screen DDX7015BT device to use and connection method on the <APP Settings> screen. (Page 43) (Hold) When connecting the device for the first time, the DDX5015DAB/DDX5015BT/ setup screen (for connection, etc.) appears. -
Page 22: Aupeo
AUPEO! AUPEO! AUPEO! Personal Radio plays free music you really Operation buttons Playback operations like. You can develop your own personalized Displays the easy control screen. Internet radio by rating or skipping tracks. (Page 9) You can operate AUPEO! using the remote Displays the <Station Search>... - Page 23 AUPEO! AUPEO! Selecting a station NOTE Requirements for AUPEO! • Ensure you are logged in to your smartphone Display the <Station Search> screen. iPhone or iPod touch application. If you do not have an AUPEO! account, • Install the latest version of the AUPEO! application you can create one for free from your smartphone on your iPhone or iPod touch.
-
Page 24: Tuner
TUNER TUNER Operation buttons Changing the display information Listening to the radio [P1] – [P6] • Selects a stored station. (Press) Indications and buttons on the source • Stores the current station. (Hold) control screen [MODE] Changes the settings for tuner reception on the <Tuner Mode>... - Page 25 TUNER TUNER Selecting a preset station PTY Search starts. Presetting stations If there is a station broadcasting a program of Storing stations in the memory the same PTY code as you have selected, that station is tuned in. You can preset 6 stations for each band. •...
- Page 26 TUNER TUNER News Standby Reception Tracing the same program—Network- Automatic TI station seek—Auto TP Tracking Reception Seek When driving in an area where FM reception is not When traffic information station reception is poor, sufficient enough, this unit automatically tunes in to the unit automatically searches for another station another FM Radio Data System station of the same that can be received better.
-
Page 27: Digital Radio (Dab)
DIGITAL RADIO (DAB) DIGITAL RADIO (DAB) (Only for DDX5015DAB) (Only for DDX5015DAB) Operation buttons About DAB (Digital Audio Listening to Digital Radio [P>] Displays other preset numbers. Broadcasting) Indications and buttons on the source [P1] – [P15] • Selects a stored service. (Press) control screen What is DAB system? •... - Page 28 DIGITAL RADIO (DAB) DIGITAL RADIO (DAB) Changing the display information Select a service from the list. Presetting services On the <Preset List> Storing services in the memory • You can change the page to display more items by pressing [J]/[K]. You can preset 15 services.
- Page 29 DIGITAL RADIO (DAB) DIGITAL RADIO (DAB) Activating/deactivating TI Standby Entering the Replay mode Radio Data System features Reception Searching for Radio Data System programs—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. The unit is in standby to switch to Traffic Information (TI) if available.
- Page 30 DIGITAL RADIO (DAB) DIGITAL RADIO (DAB) Operation buttons <PTY Watch> <Seamless • ON (Initial): Prevents audio If the service of the set [S][T] • Skips back or forward by about 15 program type begins with the Blend> break when switching from seconds.
-
Page 31: Other External Components
OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS Starting playback Using external audio/video Using a rear view camera players—AV-IN Connect an external component to the • To connect a rear view camera, see page 60 . AV-IN1 or iPod/AV-IN2 input terminal. • To use a rear view camera, a REVERSE lead When the operation buttons are (Page 60) connection is required. - Page 32 On the <TOP MENU> screen: the <Display> menu screen. • To erase the caution message, touch the screen. To display the picture from the rear view camera manually DDX7015BT* (Hold) DDX5015DAB/DDX5015BT/ DDX5015BTR* Adjust the parking guidelines by selecting • Press [K] repeatedly to change the page on...
-
Page 33: Using A Smartphone-Hdmi/Mhl
OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS Displaying the screen of the Using a smartphone—HDMI/MHL Watching a TV smartphone What is HDMI/MHL? Preparation You can display the screen of smartphones • Connect the TV tuner box to AV-IN1 input terminal HDMI stands for High Definition Multi-media connected via the HDMI/MHL input terminal. -
Page 34: Using The External Navigation Unit
OTHER EXTERNAL COMPONENTS To exit the navigation screen Using the external navigation DDX7015BT unit (Only for DDX7015BT/DDX5015DAB/ DDX5015BT) You can connect a navigation unit (KNA-G620T : DDX5015DAB/DDX5015BT optional accessory) to the navigation input terminal so that you can view the navigation screen. -
Page 35: Bluetooth
BLUETOOTH BLUETOOTH Auto pairing Information for using Bluetooth® Connecting Bluetooth devices When <Auto Pairing> is set to [ON], iOS devices devices Registering a new Bluetooth device (such as iPhone) are automatically paired when connected via USB. (Page 42) When you connect a Bluetooth device to the unit for the first time, pair the unit and the device. - Page 36 BLUETOOTH BLUETOOTH Pairing a Bluetooth device from the target device Change the PIN code. Select the unit (“DDX****”) on your using a PIN code (for Bluetooth 2.0) • If you wish to skip changing the PIN code, go Bluetooth device. Display the <Bluetooth Setup>...
- Page 37 BLUETOOTH BLUETOOTH Pairing a Bluetooth device from this unit using a Deleting a registered Bluetooth device Select the device you want to connect (1), PIN code (for Bluetooth 2.0) then press [Connection] (2). Display the <Bluetooth Setup> screen. Display the <Bluetooth Setup> screen. (Page 36) (Page 36) Search for the available devices.
- Page 38 BLUETOOTH BLUETOOTH Adjusting the volume of calls/earpiece/ Adjusting the echo cancel level/ Using a Bluetooth mobile phone microphone reducing noise Receiving a call While talking... While talking... When a call comes in... • Call information is displayed if acquired. • Phone operation is not available while the •...
- Page 39 BLUETOOTH BLUETOOTH Sending text during a call Making a call • You can display the <Bluetooth Setup> screen by pressing [ You can send text during a call using the DTMF (Dual Display the phone control screen. Tone Multi Frequency) function. * When the mobile phone is not compatible with Phone Book Access On the <TOP MENU>...
- Page 40 BLUETOOTH BLUETOOTH Voice dialing • To use the A to Z search in the phone book: • To display other phone numbers: When the phone book list is displayed, you can When the phone book list is displayed, you can •...
-
Page 41: Using The Bluetooth Audio Player
BLUETOOTH BLUETOOTH Presetting phone numbers Playback information Using the Bluetooth audio player 1 Playback status* You can preset up to 5 phone numbers. 2 Playing time* Display the phone control screen. • To register a new device, see page 35. 3 Tag data (current track title/artist name/album •... - Page 42 BLUETOOTH BLUETOOTH Setting items Settings for Bluetooth devices < Auto Pairing> • ON (Initial): Establishes pairing automatically with the <Paired Device Press [Enter] to show the list You can change various settings for using Bluetooth connected iOS device (such as List>...
-
Page 43: Settings
SETTINGS SETTINGS <USB 1 Wire> Select this when the iPod/ Settings for using applications of iPhone is connected using KCA- iPod/iPhone/Android iP102 (optional accessory) or KCA-iP103 (optional accessory). Before using applications of iPod/iPhone/Android • If you do not need to change the setting, <HDMI + Select this when the iPod/ such as AUPEO!, select the device to use and... -
Page 44: Sound Adjustment
• You can also display the <Equalizer> screen by Setting the car type and speakers Sound adjustment pressing AUD (for DDX7015BT ) or by pressing Display the <Car Setting> screen. Using the sound equalization and holding the Volume/ATT/AUDIO knob (for On the <TOP MENU>... - Page 45 SETTINGS SETTINGS Setting the speakers—speaker size and Setting the listening position Adjust the crossover frequency of the crossover frequency selected speaker. You can adjust the sound effects according to your listening position. Display the <Speaker Select> screen. Display the <Position> screen. On the <TOP MENU>...
-
Page 46: Adjustment For Video Playback
SETTINGS SETTINGS Adjusting the Digital Time Alignment (DTA) Determining the value for <Position DTA> Adjustment for video playback Make fine adjustments to the delay time of adjustment Adjusting the picture the speaker output to create a more suitable If you specify the distance from the center of the environment for your vehicle. - Page 47 SETTINGS SETTINGS Zooming the picture Adjust the picture. Select the aspect ratio. You can zoom the picture. Zooming is available only when discs are played back. Display the adjustment menu. <Bright> Adjusts the brightness. (−15 to +15) <Full>* For 16:9 original pictures <Contrast>...
-
Page 48: Changing The Display Design
SETTINGS SETTINGS To select a panel color Storing your favorite image for the Changing the display design background You can change the background and panel color. You can set your favorite image stored on the Display the <User Customize> screen. connected USB device. -
Page 49: Customizing The
SETTINGS SETTINGS Customizing the <TOP MENU> Customizing the system settings screen Memorizing/recalling the settings You can arrange the items to display on the <TOP • You can memorize the settings changed in the MENU> screen. <Setup> menu and recall the memorized settings any time.Screen - Page 50 The update will be performed from the beginning. • To reset the touch position, press [Reset]. • To cancel the current operation, press Only for DDX5015DAB. [Cancel]. Only for DDX7015BT/DDX5015DAB/DDX5015BT.
-
Page 51: Setting Menu Items
SETTINGS SETTINGS Balance: Adjust the left and right speaker output <Car Setting>* Setting menu items balance. Select a car type and speaker location. (Page 44) Displaying the <Setup> menu screen • L6 to R6 (Initial: 0) • Car type: Off (Initial)/Compact/Full Size Car/ Press [J]/[K]/[H]/[I] or drag [ ] to adjust. - Page 52 • Once: Scrolls the displayed information once. The setting is available when a commercial adapter is connected to • OFF: Cancels. the External I/F terminal (Page 60). Consult your Kenwood dealer Pressing [<] scrolls the text regardless of this setting. for details.
- Page 53 • R-CAM : Displays the picture from the rear view <SETUP Memory> information. camera. (Page 32) You can memorize, recall, or clear the settings you • English (Initial for DDX7015BT/DDX5015DAB/ <Security Code> have made. (Page 49) DDX5015BT)/Español/Français/Deutsch/ Register the security code for the unit. (Page 4) <DivX(R) VOD>...
-
Page 54: Remote Controller
• Place the battery out of reach of children. In the you press this key. unlikely event that a child swallows the battery, Available for DDX7015BT/DDX5015DAB/DDX5015BT only. immediately consult a physician. Available for DDX7015BT only. AUD mode: Switch to this mode when controlling a selected source or tuner source, etc. - Page 55 REMOTE CONTROLLER REMOTE CONTROLLER DVD/VCD (DVD mode) Music Disc/Audio file/Video file/Picture Digital Radio (DAB) (AUD mode)* file (AUD mode) Moves the cursor when displaying a Searches for services. J/K/H/I menu. AM –/FM + Selects a folder. Changes the seek mode (AUTO1, Selects a track.
-
Page 56: Connection/Installation
• Only for DDX7015BT: start a fire. Always connect those wires to the Cooling fan If the console has a lid, make sure to install the power source running through the fuse box. -
Page 57: Installing The Unit
CONNECTION/INSTALLATION CONNECTION/INSTALLATION Supplied accessories for installation Installation procedure Installing the unit 1 Wiring harness x 1 To prevent a short circuit, remove the key Installing the unit 2 Trim plate x 1 · from the ignition and disconnect the 3 Extension wire (2 m) x 1 battery. -
Page 58: Connecting Wires To Terminals
Blue with white stripe (Power control/aerial control wire) To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your Brown (Mute control wire) navigation manual.) - Page 59 CONNECTION/INSTALLATION CONNECTION/INSTALLATION Connecting a USB device Connecting an iPod/iPhone iPod/iPhone except for iPod nano (7th iPod nano (7th Generation)/iPod touch (5th Generation)/iPod touch (5th Generation)/ Generation)/iPhone 5S/iPhone 5C/iPhone 5 USB device* iPhone 5S/iPhone 5C/iPhone 5 (commercially available) (commercially available) (commercially available) 0.8 m Lightning-Digital KCA-iP102...
-
Page 60: Wireless Connection
500 mA max)* When connecting the component to play on “AV-IN1” or “AV- IN2”, use the Audio and Video cable CA-C3AV (optional accessory). Only for DDX7015BT/DDX5015BT/DDX5015DAB. Only for DDX5015DAB. To use the digital radio, connect CX-DAB1 (optional accessory). If you connect the HDMI/MHL connector, fix the HDMI/MHL When connecting an external amplifier, connect its ground wire to cable using the fixture (6) and screw (7). -
Page 61: Removing The Unit
CONNECTION/INSTALLATION CONNECTION/INSTALLATION Connecting microphone for Bluetooth Removing the unit Removing the unit Connect the microphone (5) to MIC terminal. Remove the trim plate. (See the left Removing the trim plate • To install the microphone, peel off the adhesive column.) tape, fix on the installation position, then adjust Engage the catch pins on the extraction Insert the two extraction keys (4), then... -
Page 62: References
REFERENCES REFERENCES To keep discs clean Maintenance More information Dirty discs may not play correctly. Caution on cleaning the unit File playback If a disc does become dirty, wipe it with a soft cloth Playing DivX files (for discs only) Do not use any solvent (for example, thinner, in a straight line from the center to the edge. - Page 63 2 GB. elapsed time indication. DVD Region code: • The stream format should conform to MPEG For DDX7015BT/DDX5015DAB/DDX5015BT: 2 system/program stream. For DDX5015BTR: 5 If you insert a DVD Video disc of an incorrect Region Code, “Region Code Error” appears on the screen.
- Page 64 REFERENCES REFERENCES Unplayable discs About data stored in the connected • The maximum number of characters (when the • Unplayable disc types and formats are as follows: characters are 1 byte): USB device/iPod/iPhone – DVD-Audio/DVD-ROM discs – Folder names: 128 characters •...
- Page 65 Cambodian Kirundi Ukrainian • When operating an iPod/iPhone, some operations Greek Kannada Rumanian Urdu may not be performed correctly or as intended. In this case, visit the following KENWOOD web site: Esperanto Korean (KOR) Kinyarwanda Uzbek <www.kenwood.com/cs/ce/ipod> Estonian Kashmiri Sanskrit Vietnamese •...
-
Page 66: Error Message List
REFERENCES REFERENCES “Connection Error”: Error message list Troubleshooting • The device is registered but the connection has failed. Connect the registered device. (Page 37) If an error occurs while using the unit, a message What appears to be trouble is not always serious. appears. - Page 67 REFERENCES REFERENCES Discs Videos cannot be played. • Connect with USB Audio and Video cable Recordable/Rewritable discs cannot be played “Reading” does not disappear from the screen. KCA-iP202 for iPod/iPhone except for iPod nano back. • Turn the power off and on again. (7th Generation)/iPod touch (5th Generation)/ •...
- Page 68 REFERENCES REFERENCES Digital Radio (DAB) (only for Bluetooth The Bluetooth device does not detect the unit. • Search from the Bluetooth device again. DDX5015DAB) Phone sound quality is poor. • Reduce the distance between the unit and the Cannot receive an ensemble. The unit does not pair with the Bluetooth device.
-
Page 69: Specifications
Connector Type TYPE-A Monitor section Audio Decoder Linear PCM/Dolby Digital/MP3/ MHL interface section Picture Size (W x H) WMA/AAC DDX7015BT: 6.95 inches (diagonal) wide Video Decoder MPEG1/MPEG2/DivX Supported Version 156.6 mm × 81.6 mm Wow & Flutter Below Measurable Limit... - Page 70 REFERENCES REFERENCES DSP section FM tuner section LW tuner section Graphics equalizer Frequency Range (50 kHz) Frequency Range (9 kHz) BAND 7 Band 87.5 MHz to 108.0 MHz 153 kHz to 279 kHz Frequency (Hz) (BAND1-7) Usable Sensitivity 45 V Usable Sensitivity (S/N: 26 dB) 62.5/160/400/1k/2.5k/6.3k/16k 6.2 dBf ( 0.56 V/75 )
- Page 71 Weight to connect specifically to iPod, or iPhone, DDX7015BT: 2.5 kg respectively, and has been certified by the * Only for DDX7015BT/DDX5015DAB/DDX5015BT. DDX5015DAB/DDX5015BT/DDX5015BTR: developer to meet Apple performance standards. 2.0 kg Apple is not responsible for the operation of Audio section...
- Page 72 • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
- Page 73 Par la présente JVC KENWOOD déclare que l’appareil Español Suomi Ar šo, JVC KENWOOD, apstiprina, ka “DDX7015BT/ “DDX7015BT/DDX5015DAB/DDX5015BT/DDX5015BTR” Por medio de la presente JVC KENWOOD declara que el JVC KENWOOD vakuuttaa täten että “DDX7015BT/ DDX5015DAB/DDX5015BT/DDX5015BTR” atbilst est conforme aux exigences essentielles et aux autres “DDX7015BT/DDX5015DAB/DDX5015BT/DDX5015BTR”...