D-Link Unified Access Point CLI Reference Manual
Action
Configure the IP address of up to four D-
Link Wireless Switches on your network.
IEEE 802.1X S
Use the 802.1X Supplicant Authentication settings to configure the access point to authenticate to a secured wired network.
Action
Enable 802.1X supplicant
Disable 802.1X supplicant
Set the 802.1X user name
Set the 802.1X password
© 2001- 2009 D-Link Corporation. All Rights Reserved
18
Table 9: Managed Access Point Commands
Command
set managed-ap switch-address-1 <ip_address>
set managed-ap switch-address-2 <ip_address>
set managed-ap switch-address-3 <ip_address>
set managed-ap switch-address-4 <ip_address>
Example:
set managed-ap switch-address-1 192.168.2.123
A
UPPLICANT
UTHENTICATION
Table 10: IEEE 802.1X Supplicant Commands
Command
set dot1x-supplicant status up
set dot1x-supplicant status down
set dot1x-supplicant user <name>
set dot1x-supplicant password <password>