Sanyo VDC-D2185VP Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Security Camera
  5. VDC-D2185VP
  6. Service manual
Sanyo VDC-D2185VP Service Manual

Sanyo VDC-D2185VP Service Manual

Colour ccd camera
Hide thumbs Also See for VDC-D2185VP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
SERVICE MANUAL
COLOUR CCD Camera

SPECIFICATIONS

Scanning system : PAL standard (625 TV lines, 25 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/4 inch solid state image device CCD
Picture elements : 795 (Horizontal) x 596 (Vertical)
Effective picture elements : 752 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync, Line lock
Resolution : 520 TV lines horizontally, 400 TV lines vertically
Video output level : 1.0 Vp-p/75 Ω, composite
Video S/N ratio : More than 48 dB
Minimum required illumination : Approx. 0.06 lux with a F 1.4 lens (B/W mode),
(incandescent lighting)
Power and Day/night cable : Manual colour/black and white setting
Backlight compensation : Manual ON (Multi-spot photometry,
Centre-focus photometry)/OFF switching
(Active when using an auto-iris lens)
Electronic shutter : 4 speeds, selectable by switches:
(1/50, 1/120, 1/1000, 1/2000 sec.)
White balance : ATW/Manual switching
Pan/tilt adjustment : Manual Pan: ±180 degree, Tilt: 115 degree
Lens : f = 2.8 - 5.8 mm, F1.4 - F1.8
Environmental conditions : Temperature: -10 °C ~ + 50 °C
Humidity: less than 90 % (no condensation)
Power supply : 24 V AC, 50 Hz and 12 -15 V DC
Power consumption : Approx. 2.9 W
Weight : VDC-D1185VP: Approx. 1,350 g
VDC-D2185VP: Approx. 1,015 g
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
L5AK4/XE, L5AL4/XE
Approx. 1.2 lux with a F 1.4 lens (colour mode)
PRODUCT SAFETY NOTICE
FILE NO.
VDC-D2185VP
(Product Code : 117 124 01)
VDC-D1185VP
(Product Code : 117 125 01)
(Europe)
VDC-D2185VP
CONTENTS
1. DISASSEMBLY ....................................2
2. BOARD LOCATION ............................. 3
3. ADJUSTMENT .....................................4
4. PARTS LIST ......................................... 7
CIRCUIT DIAGRAM &
PRINTED WIRING BOARDS ................. C1
REFERENCE No. SM5310501

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VDC-D2185VP

Summary of Contents for Sanyo VDC-D2185VP

  • Page 1: Specifications

    Power supply : 24 V AC, 50 Hz and 12 -15 V DC Power consumption : Approx. 2.9 W CONTENTS Weight : VDC-D1185VP: Approx. 1,350 g VDC-D2185VP: Approx. 1,015 g 1. DISASSEMBLY ........2 2. BOARD LOCATION ......3 3. ADJUSTMENT ........4 4.
  • Page 2 2. Cabinet top 24. CA3 board 3. Two screws 3 x 6 25. Two screws 2 x 4 11. Four screws 4 x 6 VDC-D2185VP 4. Connector 26. CA2 board 12. Cabinet bottom 5. Poly sheet 27. Two screws 2 x 5 13.

  • Page 3: Board Location

    2. BOARD LOCATION TP200 VR121 CT232 TP232 CA-2 board (Side B) CA-1 board (Side A) S3002 VR322 VR303 VR302 CA-3 board (Side B) – 3 –...
  • Page 4 3-3-1. Computer screen during adjustment 3. ADJUSTMENT 3-1. ADJUSTMENT CONDITION ADJUSTMENT (VHJ_0157) Ver.1.00 1. Use the 5,100K viewer for the subject. SCHEDULE 2. Set the trigger signal of oscilloscope to VIDEO OUT, and apply H sync unless specified. Rom Clear(Others Adj Value) START 3.
  • Page 5 3-5. White Balance Adjustment 3-7. AGC Level ADJUSTMENT Adjustment location: VR302, VR303 (CA-3) Adjustment location: Computer screen Measuring location: VIDEO OUT Measuring location: VIDEO OUT Measuring equipment: Oscilloscope, Vectorscope Measuring equipment: Oscilloscope, color bar chart Subject: Color bar chart Subject: Gray scale chart Adjusting method: Adjusting method: 1.
  • Page 6 3-10. 28 MHz VCO Voltage ADJUSTMENT Adjustment location: CT232 (CA-2) Measuring location: TP232 (CA-2) Measuring equipment: Digital voltmeter Subject: No designation Adjusting method: 1. Set the syncronization mode to INT mode. 2. Adjust with CT232 to 5.0 ± 0.2 V. 3-11.
  • Page 7 613 200 5043 COMPL PWB,CA-2 5119 412 066 9000 SPECIAL SCREW-4.0X16 613 200 4251 COMPL PWB,CA-3 5130 613 200 2585 CABINET BOTTOM,VDC-D2185VP ONLY 613 200 2226 COMPL PWB,CA-4 5130 613 201 0429 CABINET BOTTOM,VDC-D1185VP ONLY CN002 610 227 9771 SOCKET,BNC (N.S.P)
  • Page 8 ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT...
  • Page 9 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION R1238 401 226 1503 MT-GLAZE 0.000 ZA 1/16W C2144 403 285 6901 TA-SOLID 22U M 6.3V (CONNECTORS) C2145 403 381 4801 ELECT 100U M 6.3V CN102 645 012 7069 PLUG,60P (N.S.P) C2146 403 285 5003 TA-SOLID 1U M 25V...
  • Page 10 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION R2339 401 224 9006 MT-GLAZE 10K JA 1/16W (INDUCTORS) R2340 401 224 8900 MT-GLAZE 100K JA 1/16W L3101 645 052 4264 INDUCTOR,100U N R2341 401 224 9402 MT-GLAZE 1.0M JA 1/16W L3102 645 050 7489 INDUCTOR,100U K R2342...
  • Page 11 FUSE 125V 2A (CONNECTORS) CN401 645 002 3019 PLUG,3P (N.S.P) ACCESSORIES & PACKING MATERIALS 9102 613 200 7535 INSTRUCTION MANUAL 9010 645 032 8923 CORE,FERRITE 9000 613 200 7245 CARTON CASE INNER,VDC-D2185VP ONLY 9000 613 201 2928 CARTON CASE INNER,VDC-D1185VP ONLY...

  • Page 12: Table Of Contents

    CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING, BLOCK DIAGRAM & CIRCUIT DIAGRAMS OVERALL WIRING OVERALL CIRCUIT BLOCK DIAGRAM IC101 & IC102 BLOCK DIAGRAMS CA-1 CIRCUIT CA-1 CIRCUIT WAVEFORMS IC103 BLOCK DIGARAM CA-2 CIRCUIT WAVEFORMS CA-2 CIRCUIT CA-3 CIRCUIT CA-4 CIRCUIT PRINTED WIRING BOARDS (P.W.B.)
  • Page 13 NOTES: 1. All resistance values in "OHMS" unless otherwise noted. (K=1,000 ; M=1,000,000) µ 2. All capacitance values in " F" unless otherwise noted. µ p=pico farad ; ,u or U=micro farad µ 3. All inductance values in " H" unless otherwise noted. µ...

  • Page 14: Overall Wiring, Block Diagram & Circuit Diagrams

    OVERALL WIRING, BLOCK DIAGRAM & CIRCUIT DIAGRAMS OVERALL WIRING CA-1 CA-2 CA-3 CA-4 CCD & MAIN PROCESS POWER & SW AC INPUT MOTOR DRIVE & MICON CN102 CN201 CN203 CN303 3.3V 3.3V CCD4 CCD3 CCD2 CCD1 CCD0 CN301 W4001 CN401 ADCK_B AC24V AC24V...

  • Page 15: Overall Circuit Block Diagram

    OVERALL CIRCUIT BLOCK DIAGRAM IC101 BLOCK DIAGRAM (ICX279AK) IC102 BLOCK DIAGRAM (CXD3400N) Input Buffer XSHT XSG3B XSG3A XSG1B XSG1A CXD3400N...

  • Page 16: Circuit

    CA-1 CIRCUIT L1004 10;J CN102 3.3V 3.3V CCDI4 CCD4 CCD9 CCDI9 IC102 CCD3 CCD8 CCDI3 CCDI8 AGCCS CXD3400N C1111 R1102 CCD2 CCD7 CCDI2 CCDI7 1;35-T 100K 36 35 34 33 32 31 30 29 28 27 26 25 CCD1 CCD6 CCDI1 CCDI6 CT-B2...

  • Page 17: Circuit Waveforms

    CA-1 CIRCUIT WAVEFORMS IC103 BLOCK DIAGRAM (AD9848A) TEST POINT TEST POINT WAVEFORM WAVEFORM LOCATION LOCATION VRT VRB IC101-1 IC101-13 AD9848 VREF 2 to 36 dB 4–6 dB 2V/div 2V/div 10 or 12 CCDIN PxGA DOUT 20µs/div 50ns/div CLPOB CLAMP INTERNAL CLAMP CLOCKS CLPDM...
  • Page 18 CA-2 CIRCUIT CN201 CA-2 3.3V 3.3V 3.3V CCDI4 CCD4 CCD9 CCDI9 C2-12401/L5AK4-XE CN203 CCDI3 CCD3 CCD8 CCDI8 R2146 CCDI2 CCD2 CCD7 CCDI7 3.3V 3.3V 3.3V 3.3V CCD1 CCD6 3.3V 3.3V CCDI1 CCDI6 CCD0 CCD5 CCDI0 CCDI5 L2141 10;J C2141 AGC_CS AGCCS 100;6.3 C2144...

  • Page 19: Circuit

    CA-2 CIRCUIT [UPPER-LEFT] CN201 3.3V 3.3V 3.3V CCD4 CCD9 CCDI4 CCDI9 CCD3 CCD8 CCDI3 CCDI8 R2146 CCD2 CCD7 CCDI2 CCDI7 3.3V CCDI1 CCD1 CCD6 CCDI6 CCD0 CCD5 CCDI0 CCDI5 L2141 10;J C2141 AGC_CS AGCCS 100;6.3 C2144 ADCK_B AGC_CLK ADCK AGCCLK 22;6.3-T CE-D R2122...

  • Page 20: Circuit

    CA-2 CIRCUIT [UPPER-RIGHT] CA-2 C2-12401/L5AK4-XE CN203 R2146 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V L2141 10;J C2141 100;6.3 C2144 22;6.3-T CE-D R2122 C2121 L2121 C2122 68;J 0.01;B C2142 CT-B2 0.1;B Q2102 Q2101 IC214 2SC4081(R) 2SA1576A(R) 18P;CH NJM2274 TP211 VIDEO OUT R2141 R2142 R2605 VSAG...

  • Page 21: Circuit

    CA-2 CIRCUIT [LOWER-LEFT] LSI RESET C2113 CSYNC 0.1;B VCC1 TEST ADCK ADCK X IN Q2401 X OUT UMG2N AVDD CLPOB CAOUT C2112 PBLK AGND 0.1;B VCC1 IC211 IC241 GND2 VCC2 CAMERA ASIC MICON PCOSC EXTSCI XSG1 XSG1 ADJSCI TP221 XSG2 XSG2 VSUB VSUB...
  • Page 22 CA-2 CIRCUIT [LOWER-RIGHT] LSI RESET R2271 232I RS232IN R2274 R2272 R2434 RS232OUT X IN 232O R2273 Q2401 X OUT RESET R2275 UMG2N IC241 IRIS REF IN REFI MICON MANU WB B MANU WB R R2201 IRIS VCA CCDLEV IRIS REF OUT REFO PLLCTL1 E2PROM...
  • Page 23 CA-3 CIRCUIT CN304 CL30401 VIDEO OUT TP303 TP301 TP302 CA-3 CL30402 TLV431 CN305 Anode Ref:2.4V CL30501 P1-12400/L5AK4-US EXT-BW CL30502 T3001 +3.3V D3101 1SR159-200 L3101 EXT-C VA301 100U Cathode CL30503 VA302 TOP_VIEW CN303 D3015 CL30301 3.3V 3.3V R3105 CEE156 C3110 REG. IC311 TO CA-4 TLV431...

  • Page 24: Printed Wiring Boards (P.w.b.)

    PRINTED WIRING BOARDS (P.W.B.) CA-1 BOARD (SIDE A) CA-4 CIRCUIT CL40011 F4001 D4001 2A DC60V/AC125V DBB08C CN401 W4001 CL4011 AC24V/+ AC24V CL4012 CL40012 AC24V/- DC36V CN123 F.GND CL40013 GND(FG) TO CA-3 CN301 CL40014 CA-1 BOARD (SIDE B) CL40021 CL40019 CL40017 CL40015 CL40022 CL40020...
  • Page 25 CA-2 BOARD (SIDE A) CA-3 BOARD (SIDE A) CA-4 BOARD (SIDE A) CN401 L5AK4/US XE 1AC4B10F6000AB SIDE A CA-4 W4001 CA-2 BOARD (SIDE B) CA-3 BOARD (SIDE B) CA-4 BOARD (SIDE B) 1AC4B10F5500CE CN401 IC314 C4001 D3102 C4003 D4001 C4002 D4001 SIDE B CA-4...
  • Page 26 SANYO Electric Co., Ltd. Osaka, Japan Jun./’03...

This manual is also suitable for:

Vdc-d1185vp

Table of Contents