Basic Controls; Main Unit - Panasonic TH-80LFB70E Operating Instructions Manual

Basic Controls

Main Unit

Touch panel IR transmission part
Installed on the four sides of the display panel.
ENTER/
+
VOL
-
MENU
INPUT
Remote control
sensor
Enter / Aspect button
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is displayed:
/
"+" : press to move the cursor up
"–" : press to move the cursor down
/
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen will switch.
Normal Viewing
Sound
INPUT button (INPUT signal selection)
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will still
consume some power as long as the power
cord is still inserted into the wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to "On"
and Terminal Board is installed.)
Orange (Depending on the type of the function board
installed, when the power is supplied to the slot)
Orange (When "Control I/F Select" is set to "DIGITAL
LINK/LAN" or "Wireless Network Standby" is set to "On".
Refer to "Operating Instructions, Network Operations")
Orange (When "Quick Launch" is set to "On".)
• Power-ON ...... Green
• HDMI1 Power management
HDMI2 Power management
......................... Orange (With HDMI1 or HDMI2 input signal.)
* These functions are not supported by TH-80LFB70E.
• PC Power management (DPMS)
......................... Orange (With PC input signal.)
• DVI-D Power management
......................... Orange (With DVI input signal.)
Note:
If the power indicator is orange, power consumption during standby
is generally larger than that of when the power indicator is red.
Brightness Sensor
Detects the brightness in the viewing environment.
USB (VIEWER): Connect to USB memory.
USB (TOUCH): When using the "WhiteBoard
Software" from the supplied CD-ROM,
connect the computer via USB cable.
SLOT: Terminal board (optional accessories) insert
slot (see page 3)
Note:
The upper side slot is for terminal board with 2-slot
width. The terminal board with 1-slot width does not
function when installed in the upper side slot.
Picture
Pos. /Size Setup
13