Advertisement
CAUTION:
WHEN INSTALLING THE BATTERIES
To prevent battery electrolyte leakage,
which may result in injury and damage
to the unit or other object, observe the
following precautions.
1.
Battery must be installed with the
proper polarity (see diagram on the
back of the unit.)
2.
Remove the battery when it is not
to be used for a month or more.
1.
Connect the stereo earphone to the
socket.
2.
Press the POWER button to "ON" to
turn on the radio.
3.
Press the BAND button to select AM
or FM.
4.
Manual tuning
Press the TUNING - or TUNING +
button briefly until the desired fre-
quency is display.
Automatic tuning
Press the TUNING - or TUNING + for
at least 1 second to tune in a station.
The unit will scan up or down the band
and receive the next receivable station.
Press the button again to continue.
5.
turn the VOLUME control to the de-
sired level.
-
Make sure you turn down the volume
before turning the power on.
If the reception of an FM station transmit-
ting is weak, as the earphone cord also
serves as an FM aerial, repositioning the
earphone cord may improve reception.
Slightly rotate the unit can strengthen weak
AM signals.
PRESET STATIONS
This unit can store up to 10 AM and 20 FM
stations in memory.
1.
Choose band and frequency as de-
scribed above.
2.
Press and hold the MEMORY button
for at least 1 second. "MEMORY" ap-
pears and preset number "1" blinks on
the display.
RADIO OPERATION
WEAK RECEPTION
To turn the radio off, press the POWER
button to "OFF".
Note: To avoid the frequency changed by
accidentally touching the buttons, slide the
HOLD switch to the direction of the arrow.
"HOLD" appears.
3.
Within 5 seconds press the PRESET
+ or PRESET - button to select the
channel number to be preset.
4.
Press the MEMORY button.
NOTE:
When presetting a new station, the previ-
ous preset station is cleared.
LISTENING TO PRESET STATIONS
1.
Press the BAND button to select FM
or AM.
2.
Press the PRESET + or PRESET -
button to select the desired channel
number. The selected channel num-
ber appears.
Advertisement
